| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transfer case lever http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=50066 |
Page 1 of 1 |
| Author: | CaKJFreedom [ Wed Feb 10, 2010 8:33 am ] |
| Post subject: | Transfer case lever |
Hi all, Is the lever supposed to have sideways movement? Normally I'd pull (kind of hard) from 2wd to 4high, n, 4 low and it would just follow the track and get there. Just had the transmission serviced and I changed fluids in both diffs. Now it goes from 2 to 4h pretty normal, n to 4 low has wiggle room side to side. Is it wrong now or was it wrong before? Gearing choices seem to work. Just curious and thanks. |
|
| Author: | corwyyn [ Wed Feb 10, 2010 10:31 am ] |
| Post subject: | Re: Transfer case lever |
Well on mine I have to move it to the right side in order to get into 4LO. As long as there isn't a lot of side-to-side play I'd say you're fine. |
|
| Author: | JeepinJarhead03 [ Wed Feb 10, 2010 7:30 pm ] |
| Post subject: | Re: Transfer case lever |
yeah it's got a spring loaded sort of to the passenger side movement |
|
| Author: | CaKJFreedom [ Thu Feb 11, 2010 8:11 am ] |
| Post subject: | Re: Transfer case lever |
So it's supposed to wiggle in 4low? Guess my Jeep just got the memo. Thanks guys! |
|
| Author: | JeepinJarhead03 [ Thu Feb 11, 2010 3:38 pm ] |
| Post subject: | Re: Transfer case lever |
it's not a straight pull back, the gate looks similar to this perhaps i'm not understanding what sort of wiggle you're talking about? http://www.northridge4x4.com/proddetail.php?prod=TF-2266900 |
|
| Author: | HoosierJeeper [ Fri Feb 12, 2010 7:30 pm ] |
| Post subject: | Re: Transfer case lever |
Mine has enough play to allow me to shift in/out of 4 lo.... |
|
| Author: | CaKJFreedom [ Fri Feb 12, 2010 10:25 pm ] |
| Post subject: | Re: Transfer case lever |
It was always pretty firm and would follow the gate through the gears. When it's in 2h there's minimal side to side wiggle. When it's down in 4L, it'll move side to side almost a good inch either direction. I'll try and take a video to clarify it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|