LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

steel front diff
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=51175		 Page 1 of 14
Author:  JMSMN [ Sat Mar 20, 2010 12:31 pm ]
Post subject:  steel front diff
Jeepin by all was contemplating building one out of steel. Sounds like a good idea. Found a questionaire on facebook regarding it. I would be interested ikn one definately. What are you guys opinions?
Author:  Dje Ryu [ Sat Mar 20, 2010 12:50 pm ]
Post subject:  Re: steel front diff
How much? I could use one.
Author:  JMSMN [ Sat Mar 20, 2010 1:52 pm ]
Post subject:  Re: steel front diff
No prices, just suggested prices, or what we would want to pay.
Author:  ATXKJ [ Sat Mar 20, 2010 2:25 pm ]
Post subject:  Re: steel front diff
http://jeepinbyal.com/jba-front_dana_30.aspx

if you fill out the form - it has a drop down menu - the first number is $1500 for the diff shell only - seems high - but definitely cheaper than SFA.
Author:  Diggerfreek [ Sat Mar 20, 2010 3:00 pm ]
Post subject:  Re: steel front diff
Last time I looked, a complete NEW unit from Chryco was almost $1900 and was back ordered.....
Author:  Fulltimer [ Sat Mar 20, 2010 3:28 pm ]
Post subject:  Re: steel front diff
I'm interested.

Terry
Author:  CRD Joe [ Sat Mar 20, 2010 4:28 pm ]
Post subject:  Re: steel front diff
I dont see how it would help me. I still think SFA is in order.
Author:  Quicksilversurf917 [ Sat Mar 20, 2010 9:37 pm ]
Post subject:  Re: steel front diff
Im interested. I dont know how to build one so I picked the 2500$ fully made and bolt in, I might be interested in the 1500$ but like I said I dont know how to build one or what I need to build one.
Author:  JJsTJ [ Sat Mar 20, 2010 10:21 pm ]
Post subject:  Re: steel front diff
I'm amazed it took this long to finally get to this point. If it was also available for the KK it might have a chance of surviving. If I didn't already have a spare for my wifes KJ I might be interested.
Just my :2cents: and I hope he sells a bunch of them.
Author:  InCommando [ Sun Mar 21, 2010 9:37 am ]
Post subject:  Re: steel front diff
I thought that the KK was already steel?
Author:  JJsTJ [ Sun Mar 21, 2010 11:23 am ]
Post subject:  Re: steel front diff
InCommando wrote:
I thought that the KK was already steel?


It is?? If so, I guess I wasn't paying attention..... again.
Author:  JL Rockies [ Sun Mar 21, 2010 1:07 pm ]
Post subject:  Re: steel front diff
My only concern is the policy of making the consumer the unwitting participants in R&D this company has.
Author:  Tokyojoe [ Sun Mar 21, 2010 1:07 pm ]
Post subject:  Re: steel front diff
JJsKJ wrote:
InCommando wrote:
I thought that the KK was already steel?


It is?? If so, I guess I wasn't paying attention..... again.



Nope...you're just getting old. :dead: ...or... :5SHOTS:

Time for you to go :BINGO:
Author:  Diggerfreek [ Sun Mar 21, 2010 4:10 pm ]
Post subject:  Re: steel front diff
Nope, the KK still has a aluminum diff that modeled off of a D30 out of a JK
Author:  JL Rockies [ Sun Mar 21, 2010 5:15 pm ]
Post subject:  Re: steel front diff
pwned
Author:  Quicksilversurf917 [ Sun Mar 21, 2010 6:02 pm ]
Post subject:  Re: steel front diff
Now now is this going to work? like will this eliminate the whole cradel and the CV's?
Author:  DirtyKK [ Sun Mar 21, 2010 6:29 pm ]
Post subject:  Re: steel front diff
Quicksilversurf917 wrote:
Now now is this going to work? like will this eliminate the whole cradel and the CV's?

itll work, kind of expensive to just buy im sure but if yours ever breaks it would be a good replacement and no this wont eliminate anything
Author:  1996xj [ Sun Mar 21, 2010 7:09 pm ]
Post subject:  Re: steel front diff
If the price would be under $1,500 for the housing I would buy, and prob. wouldn't IFS in the next year or so !!
Author:  Quicksilversurf917 [ Sun Mar 21, 2010 8:17 pm ]
Post subject:  Re: steel front diff
DirtyKK wrote:
Quicksilversurf917 wrote:
Now now is this going to work? like will this eliminate the whole cradel and the CV's?

itll work, kind of expensive to just buy im sure but if yours ever breaks it would be a good replacement and no this wont eliminate anything


Then how is this thing going to work if he is asking us if we wanted to run bigger gears.. like 4.10's with 32" tires, 4.56 with 34" tires, and 4.88 with 36" tires?
Author:  DoverKJ [ Sun Mar 21, 2010 8:20 pm ]
Post subject:  Re: steel front diff
More choices as the housing will be a standard Dana 30 like those found in TJ's and XJ's. We are limited by the Dana 30A housing as they only make either the 3.73's or the 4.10's for it.
Page 1 of 14 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/