Any mounting issues with transplanting gasser skids to a CRD (are they the same thing) - or are they different enough not to bother with?
Did a little searching, but did not bump into an answer.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Gasser factory skids to CRD - issues? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=51293 |
Page 1 of 1 |
| Author: | 95BadBoy [ Tue Mar 23, 2010 1:34 pm ] |
| Post subject: | Gasser factory skids to CRD - issues? |
Any mounting issues with transplanting gasser skids to a CRD (are they the same thing) - or are they different enough not to bother with? Did a little searching, but did not bump into an answer. |
|
| Author: | ATXKJ [ Tue Mar 23, 2010 2:36 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
Factory ones are the same. If you find an All-J's SuperSkid the CRD uses the 02-04 gasser skid - but the 05-07 gassers use a different model - but Superskids are tucked in a lot closer - there's even limited space for the oil filter (you can't use one of the large sizes). no Idea on Skid row, or Rusty's |
|
| Author: | CRD Joe [ Tue Mar 23, 2010 2:43 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
Al J doesnt make them anymore does he? |
|
| Author: | 95BadBoy [ Tue Mar 23, 2010 2:51 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
ATXKJ - Appreciate the info, All-J's will be out of the picture as I do run the larger filters. Looking at a factory set from a Lost member - just needed to be sure. |
|
| Author: | ATXKJ [ Tue Mar 23, 2010 2:52 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
All-J's doesn't make them anymore. I got a used one from USAFCOP (he's getting ready for SFA) after I bent my stock one enough to bend the tranny pan (way, way too easy to do that) Jeepin Al - sells Skid Row |
|
| Author: | JL Rockies [ Tue Mar 23, 2010 3:50 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
The fact that they're MOPAR is your biggest concern. Did I ever tell you about the time in MOAB when...... |
|
| Author: | 95BadBoy [ Tue Mar 23, 2010 5:42 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
JL Rockies wrote: The fact that they're MOPAR is your biggest concern. Did I ever tell you about the time in MOAB when...... ha ha, they folded like a wet envalope I'm guessing.  Run heavy Rockman junk under the TJ.  Hadn't planed on bringing the CRD to Moab ...... but you never know when plans will change.  With the alum front diff I doubt it will anytime soon though.
|
|
| Author: | CRD Joe [ Tue Mar 23, 2010 5:43 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
What about the ASFIR aluminum jobs? |
|
| Author: | 95BadBoy [ Tue Mar 23, 2010 5:51 pm ] |
| Post subject: | Re: Gasser factory skids to CRD - issues? |
I really like a lot of the new alum/stainless stuff coming out in the last year for TJ's. But things out there now are still pretty limited for our KJ's in comparison, and the cost is quite high with the low production numbers that are made. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|