LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

JBA arms...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52481		 Page 1 of 1
Author:  TexasRock [ Wed May 05, 2010 12:26 am ]
Post subject:  JBA arms...
Did they make 3.0 arms?

I didn't think so, but the ones that I sold, the guy is claiming they are 3.0 arms. Marlin only had the 3.5's before he upgraded the angle on the ball joint to the 4.5s...

I guess that is why he only sells ball joints for the 3.5s because the 3.0s don't exist.

I appreciate any and all feedback...

Keith
Author:  tommudd [ Wed May 05, 2010 7:47 am ]
Post subject:  Re: JBA arms...
There were 3.0 arms
The 3.5s are remakes of the 3.0 but with a replaceable ball joint that bolts in, 3.0s were pressed in
After the 3.0s there were 4.0s then 5.0s , 5.0s were only made a very short time with 4.5s taking there place. If you had a set with bolt in ball joints then they are the 3.5s that are welded differently ( like the 4.5s ) 3.5s are not quite as long in the arms and have a little different angle I think on the end where the ball joint sits.
I think this is pretty much how it went, been a while :wink:
Author:  JL Rockies [ Wed May 05, 2010 11:25 am ]
Post subject:  Re: JBA arms...
... and thankfully no one was killed during this R&D process :wink:
Author:  long_tall_texan [ Wed May 05, 2010 2:14 pm ]
Post subject:  Re: JBA arms...
Just out of curiosity, were the ball joints on the 3.0's replaceable, even though they were pressed in?
Author:  tommudd [ Wed May 05, 2010 3:01 pm ]
Post subject:  Re: JBA arms...
Yes they were

and to JL :roll:
Author:  2mopar_diesels [ Wed May 05, 2010 4:28 pm ]
Post subject:  Re: JBA arms...
tommudd wrote:

and to JL :roll:



Yeh, I noticed in the steel diff thread there seems to be some friction about you with JBA...........did something happen that you just can't get over and feel the need to place negative remarks everytime a JBA thread is posted?

And to the original poster, if you don't feel comfortable using the a-arms you have, then send them back to JBA and he will hook you up with the latest and greatest version for a small price.
Author:  JeepinJarhead03 [ Wed May 05, 2010 5:23 pm ]
Post subject:  Re: JBA arms...
JL has a problem with certain practices of JBA involving christian materials being sent unsolicited with their products

it bleeds over into his opinion of their products as if the two have anything to do with one another

and yes, it gets quite old and repetitive
Author:  Fulltimer [ Wed May 05, 2010 5:39 pm ]
Post subject:  Re: JBA arms...
JeepinJarhead03 wrote:
JL has a problem with certain practices of JBA involving christian materials being sent unsolicited with their products

it bleeds over into his opinion of their products as if the two have anything to do with one another

and yes, it gets quite old and repetitive


X2 on that!

Terry
Author:  Twack [ Wed May 05, 2010 10:38 pm ]
Post subject:  Re: JBA arms...
TexasRock wrote:
Did they make 3.0 arms?

I didn't think so, but the ones that I sold, the guy is claiming they are 3.0 arms. Marlin only had the 3.5's before he upgraded the angle on the ball joint to the 4.5s...

I guess that is why he only sells ball joints for the 3.5s because the 3.0s don't exist.

I appreciate any and all feedback...

Keith

I told you they were 3.0 and not 3.5 arms. Now do you see why im pissed about getting a much inferior product?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/