Just arrived today, Marlin did a fantastic job putting together a replacement for my stock diff. (which by the way will be for sale soon
). Not sure when I will have time to install it. Anyone want to help?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| JBA Steel D30 - Break-in update http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52496 |
Page 1 of 2 |
| Author: | bugnout [ Wed May 05, 2010 7:08 pm ] |
| Post subject: | JBA Steel D30 - Break-in update |
Just arrived today, Marlin did a fantastic job putting together a replacement for my stock diff. (which by the way will be for sale soon ). Not sure when I will have time to install it. Anyone want to help?
|
|
| Author: | JeepinJarhead03 [ Wed May 05, 2010 7:11 pm ] |
| Post subject: | Re: JBA Steel D30 |
so red and shiny! Fix it! |
|
| Author: | Diggerfreek [ Wed May 05, 2010 10:31 pm ] |
| Post subject: | Re: JBA Steel D30 |
Nice to see the updated one 
|
|
| Author: | 2mopar_diesels [ Wed May 05, 2010 11:14 pm ] |
| Post subject: | Re: JBA Steel D30 |
Make sure you clearance those rear facing mounting tabs on the passenger side, as I had to do, before you bolt it in. Cause it don't look as though Marlin did as he should.  
|
|
| Author: | KJ 119 [ Wed May 05, 2010 11:16 pm ] |
| Post subject: | Re: JBA Steel D30 |
What's in it!!!!!!!!!!! 
|
|
| Author: | bugnout [ Wed May 05, 2010 11:43 pm ] |
| Post subject: | Re: JBA Steel D30 |
2mopar_diesels wrote: Make sure you clearance those rear facing mounting tabs on the passenger side, as I had to do, before you bolt it in. Cause it don't look as though Marlin did as he should. He clearanced it. You can see it better in this picture 
|
|
| Author: | bugnout [ Wed May 05, 2010 11:44 pm ] |
| Post subject: | Re: JBA Steel D30 |
KJ 119 wrote: What's in it!!!!!!!!!!!  Yukon 4:10's ARB RD100 Locker
|
|
| Author: | 2mopar_diesels [ Wed May 05, 2010 11:47 pm ] |
| Post subject: | Re: JBA Steel D30 |
bugnout wrote: KJ 119 wrote: What's in it!!!!!!!!!!! Yukon 4:10's ARB RD100 Locker You lucky sensored word!!!!! I wanted to be the 1st KJ with an Eaton E-Locker for mine, but funds didn't quite allow it, so I had to reuse the old DTT. |
|
| Author: | 95BadBoy [ Thu May 06, 2010 11:31 am ] |
| Post subject: | Re: JBA Steel D30 |
bugnout wrote: KJ 119 wrote: What's in it!!!!!!!!!!! Yukon 4:10's ARB RD100 Locker Nice. Very very nice.
|
|
| Author: | jafstl38 [ Thu May 06, 2010 11:34 am ] |
| Post subject: | Re: JBA Steel D30 |
this is probably a very newb question here but cant you now run like 6" springs? Or is that still only for the SFA KJs? |
|
| Author: | Powerman04 [ Thu May 06, 2010 11:43 am ] |
| Post subject: | Re: JBA Steel D30 |
jafstl38 wrote: this is probably a very newb question here but cant you now run like 6" springs? Or is that still only for the SFA KJs? Can't do it, since it doesn't eliminate the UCA's. |
|
| Author: | STINGN [ Thu May 06, 2010 1:13 pm ] |
| Post subject: | Re: JBA Steel D30 |
Powerman04 wrote: jafstl38 wrote: this is probably a very newb question here but cant you now run like 6" springs? Or is that still only for the SFA KJs? Can't do it, since it doesn't eliminate the UCA's. unless he adds a cradle drop |
|
| Author: | dgeist [ Tue May 11, 2010 12:48 am ] |
| Post subject: | Re: JBA Steel D30 |
So, which one of those is the drain and which is the fill? They look like they're parallel and neither would drain fully when in a mounted position... Dan |
|
| Author: | USAFCOP [ Tue May 11, 2010 12:53 am ] |
| Post subject: | Re: JBA Steel D30 |
the drain is on the bottom of the housing... Looks like the cover has two fill holes |
|
| Author: | JeepinJarhead03 [ Tue May 11, 2010 1:09 am ] |
| Post subject: | Re: JBA Steel D30 |
secondary bung opening for eaton or arb hose/wiring? |
|
| Author: | tommudd [ Tue May 11, 2010 8:02 am ] |
| Post subject: | Re: JBA Steel D30 |
If you look the original hole in the cover would not be accessible due to the mount being in the way, so a second fill hole was added to be easier. Or at least thats what I am seeing
|
|
| Author: | bugnout [ Tue May 11, 2010 9:57 am ] |
| Post subject: | Re: JBA Steel D30 |
tommudd wrote: If you look the original hole in the cover would not be accessible due to the mount being in the way, so a second fill hole was added to be easier. Or at least thats what I am seeing Thats correct. The new extended bung on the left is the new fill. A new drain was added to bottom.
|
|
| Author: | JeepinJarhead03 [ Tue May 11, 2010 11:07 am ] |
| Post subject: | Re: JBA Steel D30 |
and knowing is half the battle! |
|
| Author: | linewarbr [ Tue May 11, 2010 12:35 pm ] |
| Post subject: | Re: JBA Steel D30 |
[Itch itch itch itch itch. . . . . ] |
|
| Author: | bugnout [ Tue May 11, 2010 12:56 pm ] |
| Post subject: | Re: JBA Steel D30 |
JeepinJarhead03 wrote: secondary bung opening for eaton or arb hose/wiring? The air line fitting for the ARB is on the top of the pumpkin. The little brass fitting you see in this photo.
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|