LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Need to finish my lift!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52572		 Page 1 of 1
Author:  omGoddard [ Sat May 08, 2010 4:12 pm ]
Post subject:  Need to finish my lift!
I've got a Front ONLY Frankenlift Premium II coming in the mail and I need to finish up the rear lift.

For the rear I plan to run: OME948 springs. Just need to know what specific shocks are alright to use now that Rancho's are out?

Also, in addition to the above lift, what can I add to it without making the CV's mad? Conduit nuts or boilers top plate for the front? Rear ISO pads?

Thanks!
Author:  daspes [ Sun May 09, 2010 8:50 pm ]
Post subject:  Re: Need to finish my lift!
ON a Frankie don't do a top plate for sure. The FL already has a new strut plate installed. The clevis lift may be to much right off until the springs get broken in.
Author:  RED_KJ_666 [ Sun May 09, 2010 10:02 pm ]
Post subject:  Re: Need to finish my lift!
Yeah from what I have read even after it settles you only want the 1/4" Top Plates. Not the 3/8" ones
Author:  tommudd [ Sun May 09, 2010 10:09 pm ]
Post subject:  Re: Need to finish my lift!
No Top plate on a Frankenlift :shock: :shock: :shock: :shock:
I better take the one I have had on there for over 7000 miles then :ROTFL:

You can do a 1/4 inch only due to bolt length, if longer bolts are installed you can do a 3/8 inch

But some of the above information is correct, need to let the springs settle in before you do much.

Pretty much a "broken in" Frankenlift and a 1/4 inch top plate will get you as high as you want to go with out hearing the CVs cry too much

Of course I took a new gas Frankenlift parts, used 790 springs and 1/4 inch top plates from the get go!

But then with no extra heavy bumper etc does make a huge difference.
Author:  omGoddard [ Mon May 10, 2010 5:49 pm ]
Post subject:  Re: Need to finish my lift!
Thanks, I guess I'll just do a Clevis. JUST got the UPS box at the door, Tom.

Can anyone be more specific with options for rear shocks? lol I just want to order them tonight and be done.
Author:  RED_KJ_666 [ Mon May 10, 2010 9:30 pm ]
Post subject:  Re: Need to finish my lift!
Rancho 999284 I believe is the part number for the 9000xl Lifted rear shocks.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/