LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Help Needed
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52594
Page 1 of 1

Author:  RED_KJ_666 [ Sun May 09, 2010 3:31 pm ]
Post subject:  Help Needed

I need a D30A Axle shaft. I suggest anyone who has a mystery clunk while turning to check out where the inner axle and CV connect on the passenger side. I replaced Everything up front and still had this weird Clunk and slight rotational thump. turns out the inner Axle and CV had seized together and was causing a massive bind. So if anyone has a Inner Axle PM me I'm sure some of you SFA guys have one sitting around and I don't have the 378$ the local Stealer wants to get me one.

Author:  1996xj [ Sun May 09, 2010 8:27 pm ]
Post subject:  Re: Help Needed

Pack antiseize in the end of the halfshaft, and install to the inner axleshaft!!! That will prevent rust and prolong the life of the inner shaft splines !!

Author:  daspes [ Sun May 09, 2010 8:41 pm ]
Post subject:  Re: Help Needed

Check trademotion. IIRC the inner shaft was about 180.

Author:  tonycrd [ Tue May 11, 2010 2:02 pm ]
Post subject:  Re: Help Needed

Ask Eric...

http://www.jeepkj.com/forum/showthread.php?t=42934

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/