| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Daystar top Plates http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52625 |
Page 1 of 1 |
| Author: | RED_KJ_666 [ Mon May 10, 2010 9:25 pm ] |
| Post subject: | Daystar top Plates |
So I've got the Lift Itch...... I need more since the OME/Rancho setup I added. I bought some Daystar top plates but I'm wondering what bushing I need to put in it? Maybe it doesn't use one but that sounds dumb. Seeing how the stock ones have a rubber bushing in them. A part number would be awesome. I'm going to see if I can get some of LTTs spacer too and some 4.5 Arms...... Hahahahaha The TJ/YJ guys think I'm crazy, but hey it's my money pit 
|
|
| Author: | tommudd [ Mon May 10, 2010 10:29 pm ] |
| Post subject: | Re: Daystar top Plates |
You can basically get as much lift with stock set up with OME 927 springs, top plate and a 3 ring clevis, put you right at 22.75 inches or so ( maybe a little more with 3/8 inch top plate) |
|
| Author: | RED_KJ_666 [ Wed May 12, 2010 9:12 pm ] |
| Post subject: | Re: Daystar top Plates |
|
|
| Author: | RED_KJ_666 [ Wed May 12, 2010 10:00 pm ] |
| Post subject: | Re: Daystar top Plates |
I think I asked the question wrong.... what I meant was I bought a set of Daystar top plates from someone who never even unboxed them and noticed that they don't have a rubber insert in the center like the stock ones do. Do I have to buy the rubber piece? or do the daystar plates not use them? |
|
| Author: | long_tall_texan [ Wed May 12, 2010 11:28 pm ] |
| Post subject: | Re: Daystar top Plates |
Yes, the Daystar plates use them. I bet you can get them from Daystar for a few bucks. Just send them a message on their site. They will get back to you quickly.. |
|
| Author: | Twack [ Thu May 13, 2010 1:51 pm ] |
| Post subject: | Re: Daystar top Plates |
why not just reuse the stock rubber spacers that are already on the jeep |
|
| Author: | long_tall_texan [ Thu May 13, 2010 2:52 pm ] |
| Post subject: | Re: Daystar top Plates |
because they do not come off of the stock top plates. You have to have special ones to use with the Daystar plates. |
|
| Author: | RED_KJ_666 [ Sat May 15, 2010 11:41 am ] |
| Post subject: | Re: Daystar top Plates |
Thx LTT |
|
| Author: | Twack [ Sat May 15, 2010 8:52 pm ] |
| Post subject: | Re: Daystar top Plates |
ooooooooooooo your talking about the crashpads on the plates not the spring isolators, got ya now |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|