| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Broke a sway Bar link..... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=52793 |
Page 1 of 1 |
| Author: | RED_KJ_666 [ Sun May 16, 2010 7:41 pm ] |
| Post subject: | Broke a sway Bar link..... |
Out on the trail took off the remaining piece.....   It still drives a pretty decent besides a little shimmy in big pot holes. I was going to experiment with removing it all together just out of curiosity. Anyone ever try this? What where your results? Off-Road gains at all? I know it flexes more so if anything I'll get Disco's From JBA. |
|
| Author: | GeekyJeep [ Sun May 16, 2010 8:57 pm ] |
| Post subject: | Re: Broke a sway Bar link..... |
they make ones you can unhook.... |
|
| Author: | RED_KJ_666 [ Sun May 16, 2010 9:04 pm ] |
| Post subject: | Re: Broke a sway Bar link..... |
Yes they do JBA makes them. http://jeepinbyal.com/prod-Front_Sway_B ... t-458.aspx |
|
| Author: | RED_KJ_666 [ Sun May 16, 2010 9:20 pm ] |
| Post subject: | Re: Broke a sway Bar link..... |
I'm ordering the Disconnects Tuesday. Sealed the Deal by checking my bank account and realizing I worked O/T last pay |
|
| Author: | tjkj2002 [ Sun May 16, 2010 10:18 pm ] |
| Post subject: | Re: Broke a sway Bar link..... |
RED_KJ_666 wrote: I'm ordering the Disconnects Tuesday. Sealed the Deal by checking my bank account and realizing I worked O/T last pay Be prepared for lots of funny/scary noises. |
|
| Author: | tommudd [ Mon May 17, 2010 8:43 am ] |
| Post subject: | Re: Broke a sway Bar link..... |
I'd just find some stock ones, not going to gain that much really and I know some who have had them and took them off and went back to stock Just an idea 
|
|
| Author: | NCC-1864 [ Mon May 17, 2010 10:15 am ] |
| Post subject: | Re: Broke a sway Bar link..... |
tjkj2002 wrote: RED_KJ_666 wrote: I'm ordering the Disconnects Tuesday. Sealed the Deal by checking my bank account and realizing I worked O/T last pay Be prepared for lots of funny/scary noises. Oh yeah You'll need the service pack , JBA-QD-SP1 this eliminate all those scary noise, A bit funky to install/deinstall for the first few times. But after a while you' ll do it quickly. |
|
| Author: | RED_KJ_666 [ Tue May 18, 2010 10:01 pm ] |
| Post subject: | Re: Broke a sway Bar link..... |
Well I'm going to try out the Disconnects. If I don't like them I'll sell them to someone else. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|