LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

BUSHWACKER Fender Flares
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=53209		 Page 1 of 1
Author:  extreme_kj [ Mon May 31, 2010 6:42 pm ]
Post subject:  BUSHWACKER Fender Flares
guys i know this is an old thread but i thing it deserves a fresh up

i've seen hundrends of mods here, easy ones and extreme ones.

my question is simple.
who has really ever tried to fit bushwacker fenders from a xj to a kj?
i mean try.. not just compare them side to side with stocks. (measure, cut, stick).

i'm almost sure that both front and back can be modified to fit our kjs.
that's why i think to order a set and move on.

I'd like anyones opinion but i'd like to hear from people who have tried to do that.
come on lets be creative.... :SOMBRERO:
Author:  stumpjumper_09 [ Mon May 31, 2010 6:53 pm ]
Post subject:  Re: BUSHWACKER Fender Flares
Do It!!!!!!!

Post PIcs!!!!!
Author:  extreme_kj [ Mon May 31, 2010 7:04 pm ]
Post subject:  Re: BUSHWACKER Fender Flares
stumpjumper_09 wrote:
Do It!!!!!!!

Post PIcs!!!!!


you bet i'll do it..
Author:  Sport [ Tue Jun 01, 2010 8:40 am ]
Post subject:  Re: BUSHWACKER Fender Flares
Bushwacker just came out with flat fenders for the XJ, they may fit after some trimming.
Author:  InCommando [ Tue Jun 01, 2010 2:56 pm ]
Post subject:  Re: BUSHWACKER Fender Flares
XJ wheel openings are just so tiny. It would be great if it worked out, but you might end up getting a 2dr set so you could cut them where you needed to for the door opening on the rear rather than having to make the pre-cut 4dr XJ rears work. Some measurment comparison beforehand might help with that decision.
Author:  extreme_kj [ Tue Jun 01, 2010 3:53 pm ]
Post subject:  Re: BUSHWACKER Fender Flares
InCommando wrote:
XJ wheel openings are just so tiny. It would be great if it worked out, but you might end up getting a 2dr set so you could cut them where you needed to for the door opening on the rear rather than having to make the pre-cut 4dr XJ rears work. Some measurment comparison beforehand might help with that decision.


thanks i didn't thought that
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/