LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Would you relocate your washer bottle for a better bumper?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=5362		 Page 1 of 2
Author:  Rock Lizard [ Mon Jan 30, 2006 2:53 am ]
Post subject:  Would you relocate your washer bottle for a better bumper?
OK, I designed up a front bumper (http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=5360), but the problem was the washer bottle hangs down so far, it really hurt the angles of the design to be sure it was protected, and to keep the design simple to avoid undue expenses. So, the question is, if you were to buy a better front bumper, would you be willing to replace the washer bottle with another if the replacement was cheap and easy to move? I think it is a simple answer, but I still have to ask.
Author:  ManicMechanicJoe [ Mon Jan 30, 2006 4:24 am ]
Post subject: 
does the pope wear a funny hat?
Author:  Ed [ Mon Jan 30, 2006 6:07 am ]
Post subject: 
Mate, I'd cut off my left testicle for a better bumper.




Having said that, I've already got the ARB one and the postage from the US of A would be prohibitive I fear.




Phew, my wedding tackle's safe!
Author:  Liberator84 [ Mon Jan 30, 2006 6:55 am ]
Post subject: 
Ed wrote:
Mate, I'd cut off my left testicle for a better bumper.




Having said that, I've already got the ARB one and the postage from the US of A would be prohibitive I fear.




Phew, my wedding tackle's safe!


Whats wrong the right one??

I think alot of people have already relocated there washer bottles for the ABR. So YES I WOULD!

~JUD 8)
Author:  JJsTJ [ Mon Jan 30, 2006 8:36 am ]
Post subject: 
Yes on moving the bottle. I have not had a bottle for a couple years now after busting it on a rock.
Author:  Edwin [ Mon Jan 30, 2006 8:50 am ]
Post subject: 
Yes! I sure would!
Author:  Tokyojoe [ Mon Jan 30, 2006 9:44 am ]
Post subject: 
Did Anna Nicole Smith marry that 80+ yr old man for just his money?
Author:  JJsTJ [ Mon Jan 30, 2006 11:13 am ]
Post subject: 
Tokyojoe wrote:
Did Anna Nicole Smith marry that 80+ yr old man for just his money?

No, she said he was a good kisser. :shock:
Author:  Bakerkj [ Mon Jan 30, 2006 11:17 am ]
Post subject: 
Relocating the bottle is fine with me.
Author:  kevh [ Mon Jan 30, 2006 12:21 pm ]
Post subject: 
does jeep need to put a straight axle under the front of the 07 libby?



um..yea i would move it
Author:  the1jferg [ Mon Jan 30, 2006 12:29 pm ]
Post subject: 
ED,

I made that statement once. Be careful what you wish for, I lost my right Nut and now have a rubber one. :shock:

Yes, on the washer bottle thing

LIVESTRONG
Author:  kkkustom [ Mon Jan 30, 2006 12:56 pm ]
Post subject: 
I moved mine a little while ago. Go to homedepot. get a 4inch pcv cupler (about 5 inches long) and 2, 4" caps, glue them to each side of the cupler, thus making a 8" (end to end) tank. drill a 1-1/2" hole on top and glue a short 45 deg 1-1/2" elbow to fill it. drill a 3/8 or so hole on the bottom and JBweld in your oem pick up pump. the pump needs to be submerged so do it on the bottom somewhere.

the hole thing fits perfectly behind the air box on the pass. side fender. Ill take some pics later 2night and post them. ohh yeah, it hold about 1/3 gal of fluid too.
Author:  W3CSX [ Mon Jan 30, 2006 1:03 pm ]
Post subject: 
the1jferg wrote:
I made that statement once. Be careful what you wish for, I lost my right Nut and now have a rubber one. :shock:


TMI

And Yes, I have no problems with moveing it. We just need to figure out what to to with the CRD.

Jason
Author:  Calvin56 [ Mon Jan 30, 2006 1:22 pm ]
Post subject: 
Allready relocated!

Nice Idea KKKustom- I just bought a cheapy coolent overflow unit for mine. I like the strenght the pvc would add. on the first install, the pump shook around and cracked the plastic. I just reinforced it with some aluminum PRC'd onto the side- probably took as much time as making the bottle you described lol.
Author:  Eddo [ Mon Jan 30, 2006 1:47 pm ]
Post subject: 
I wouldn't mind relocating it.
Author:  kevh [ Mon Jan 30, 2006 2:13 pm ]
Post subject: 
kkkustom wrote:
I moved mine a little while ago. Go to homedepot. get a 4inch pcv cupler (about 5 inches long) and 2, 4" caps, glue them to each side of the cupler, thus making a 8" (end to end) tank. drill a 1-1/2" hole on top and glue a short 45 deg 1-1/2" elbow to fill it. drill a 3/8 or so hole on the bottom and JBweld in your oem pick up pump. the pump needs to be submerged so do it on the bottom somewhere.

the hole thing fits perfectly behind the air box on the pass. side fender. Ill take some pics later 2night and post them. ohh yeah, it hold about 1/3 gal of fluid too.


some pics would be great...thx
Author:  hillcountrykj [ Mon Jan 30, 2006 2:28 pm ]
Post subject: 
not just yes but hell yes!
Author:  Guest [ Mon Jan 30, 2006 4:10 pm ]
Post subject: 
Depends...I plan on snorkeling my rig, and a relocated washer bottle would kinda F those plans right in the A. However, if there were no other options, absolutely.
Author:  DaveKJ02 [ Mon Jan 30, 2006 5:27 pm ]
Post subject: 
Absofreakinlutely.
Author:  Calvin56 [ Mon Jan 30, 2006 6:16 pm ]
Post subject: 
ThunderbirdJunkie wrote:
Depends...I plan on snorkeling my rig, and a relocated washer bottle would kinda F those plans right in the A. However, if there were no other options, absolutely.


There are plenty of places and ways to relocate the washer bottle. The two brought up here are just some options!
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/