so ive got some clunkin noises coming from the front end and i think they might be coming from ball joints..... either those or the crustys lift thats currently installed.... i just havent had time to get under it and do some checking.... i am replacing the lift with ome's and rancho's soon. i found some of the RSX's still out there and have those sitting at home. just waiting to get some 927/948 coils.... if i find that the lbj's are bad, i will be replacing them with moogs from jba..... hopefully the ubj's are still good because there's quite a few things that are above the jba uca's on my list..... my question is about greasing things up for routine/preventative maintenance.... can anyone tell me what components they grease up when under the vehicle..... also what type of grease works best.....

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim

You have no grease zerks on your KJ.You have to add items like the MOOG K3199's and such to have grease zerks,it's totally sealed from the factory like 99% of all new vehicles sold now.

so when i do end up replacing my lbj's w/ moogs and the uca's with the jba 4.5's, what type of grease do you pump into those zerks......???? and is there anything i need to do to any bushings like the uca's or rear shock bushings when i install them....???

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim