| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| grease points??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=53802 |
Page 1 of 1 |
| Author: | digglesworth [ Fri Jun 25, 2010 7:07 pm ] |
| Post subject: | grease points??? |
so ive got some clunkin noises coming from the front end and i think they might be coming from ball joints..... either those or the crustys lift thats currently installed.... i just havent had time to get under it and do some checking.... i am replacing the lift with ome's and rancho's soon. i found some of the RSX's still out there and have those sitting at home. just waiting to get some 927/948 coils.... if i find that the lbj's are bad, i will be replacing them with moogs from jba..... hopefully the ubj's are still good because there's quite a few things that are above the jba uca's on my list..... my question is about greasing things up for routine/preventative maintenance.... can anyone tell me what components they grease up when under the vehicle..... also what type of grease works best..... |
|
| Author: | tjkj2002 [ Fri Jun 25, 2010 7:15 pm ] |
| Post subject: | Re: grease points??? |
You have no grease zerks on your KJ.You have to add items like the MOOG K3199's and such to have grease zerks,it's totally sealed from the factory like 99% of all new vehicles sold now. |
|
| Author: | digglesworth [ Fri Jun 25, 2010 8:01 pm ] |
| Post subject: | Re: grease points??? |
so when i do end up replacing my lbj's w/ moogs and the uca's with the jba 4.5's, what type of grease do you pump into those zerks......???? and is there anything i need to do to any bushings like the uca's or rear shock bushings when i install them....??? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|