LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

sway bar/tie rod contact
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=54084		 Page 1 of 1
Author:  M&P40 [ Wed Jul 07, 2010 3:49 pm ]
Post subject:  sway bar/tie rod contact
lately i had been noticing a clunk when i made a right hand turn and the conditions were right. that prompted me to get under there and see if i can locate the issue as i have had CV issues before and this noise did not fit. i suspect it is the tie rod end and sway bar making contact (see pics below) does anyone know of a solution or have examples of what they have done to combat this issue? thanks in advance
robert

Image
Image
Author:  tommudd [ Wed Jul 07, 2010 4:12 pm ]
Post subject:  Re: sway bar/tie rod contact
Do you have them on the right way?
I know of a couple of people who had theirs off put them back on upside down and they hit.
Just a thought
Author:  M&P40 [ Wed Jul 07, 2010 4:23 pm ]
Post subject:  Re: sway bar/tie rod contact
HAHA, that my friend is where i hit a wall :banghead: the service manual does not tell me what the "right way" is, i will flip it and see if that stops the noise, thank you :)
Author:  tommudd [ Wed Jul 07, 2010 5:17 pm ]
Post subject:  Re: sway bar/tie rod contact
here ya go
and yes I know my clevis bushings are gone :ROTFL:
Image
Author:  M&P40 [ Wed Jul 07, 2010 7:36 pm ]
Post subject:  Re: sway bar/tie rod contact
thanks for the visual it helps lots :)
Author:  JeepinJarhead03 [ Wed Jul 07, 2010 8:29 pm ]
Post subject:  Re: sway bar/tie rod contact
man i have NO Idea WHO put their sway bar links on backwards!!

and yes.. there is a difference! :P

mine didn't hit the TRE's tho, it just wasn't doing alot to prevent sway

i think the "Other" dude put his on in a way that they hit
Author:  tommudd [ Wed Jul 07, 2010 9:13 pm ]
Post subject:  Re: sway bar/tie rod contact
I never did nor will I ever mention who they were :roll: :roll: :roll:
Author:  JeepinJarhead03 [ Wed Jul 07, 2010 9:22 pm ]
Post subject:  Re: sway bar/tie rod contact
i'll mention myself, i won't out the other guy.. i should :P but won't hehe
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/