| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Buying my lift!!! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=54097 |
Page 1 of 2 |
| Author: | riptricket [ Thu Jul 08, 2010 3:16 am ] |
| Post subject: | Buying my lift!!! |
Okay so here is my idea... correct it as needed. Front: 3 Conduits per side, new springs (no idea what to get) and that should do the front. Rear: Ranchos or OME (not sure which is best) and a couple pucks... I hear 2 is okay? Please help. I really need a lift, well atleast upgrade my suspension b/c I am getting new tires in a couple of months and want to lift it before I get my new tires. Thanks to all!!! |
|
| Author: | tommudd [ Thu Jul 08, 2010 11:28 am ] |
| Post subject: | Re: Wanting a lift soo badly now... |
OME 927s front with 3 ring clevis, Teraflex bumpstops and new shocks ( Bilsteins?) OME 948s in the rear with one extra isolator and 2 hockey pucks for bumpstops, new shocks |
|
| Author: | riptricket [ Thu Jul 08, 2010 11:49 am ] |
| Post subject: | Re: Wanting a lift soo badly now... |
Front: I want HD coils OME927: FRONT COILS FOR GAS KJ - $151.55/PAIR http://www.boulderbars.com/kjproducts.htm or JBA-OME927 $79.35 so pair is $160ish http://jeepinbyal.com/cat-Old_Man_Emu_Suspension_Products-32.aspx I want a winch and bumper eventually so should I go with the OME790:FRONT COILS FOR CRD (also works with GAS model w/ARB front bumper and winch) - $155/PAIR http://www.boulderbars.com/kjproducts.htm or JBA-OEM790-D $79.35 so pair is $160ish http://jeepinbyal.com/cat-Old_Man_Emu_Suspension_Products-32.aspx Teraflex bumpstops SKU: 1903200 Price: $21.99, pair is $43ish http://www.teraflex.biz/products/front-bumpstops-liberty-jeeps.html Rancho's or OME? Which ones? Rear: I want HD coils OME948: REAR COILS FOR CRD/GAS KJ $151.55 PAIR http://www.boulderbars.com/kjproducts.htm or JBA-OME948 $79.35 so pair is $160ish http://jeepinbyal.com/cat-Old_Man_Emu_Suspension_Products-32.aspx b/c he has the hd's with proper weights... Bumpstops... you mean 2 hockey pucks literally? or could I use Daystar bumpstops? Isolator is from stealership correct? Rancho RSX17004 $62 each,$124 pair yes I can find them... or OME? |
|
| Author: | Xodius [ Thu Jul 08, 2010 4:02 pm ] |
| Post subject: | Re: Building a lift... |
OME HD...I am starting to sound like a broken record, lol. OME is a great shock. I have them on mine and I would have to say a huge portion of the people here have them too. As for the hockey pucks, yes 2 per side should be fine. I have 1 on each side, held on with epoxy, lol. Mine need to be just a tad longer and I have the extra 2 just have been too lazy to put them on. 
|
|
| Author: | riptricket [ Thu Jul 08, 2010 5:25 pm ] |
| Post subject: | Re: Building a lift... |
yes, I want the hds... just trying to figure out which ones they are on the sites... OME shocks would be fine, but I can't find them. |
|
| Author: | tommudd [ Thu Jul 08, 2010 6:03 pm ] |
| Post subject: | Re: Building a lift... |
Just look for OME 927s front OME 948s for the rear front shocks OME 130s rears you will want to get the OME 132Ls which are only available from AllJs or go with ones from Bilstein which fit the rear of a 99-04 Dakota pickup 4WD the OME 132 are stock length |
|
| Author: | riptricket [ Thu Jul 08, 2010 8:33 pm ] |
| Post subject: | Re: Building a lift... |
are the 927s better than the 790s? also, I really need the help... confused. I want the best, comparable to franky, but can't spend that much... I know i'm a little annoying, but I just don't want to buy the wrong parts! Thanks 
|
|
| Author: | digglesworth [ Fri Jul 09, 2010 12:21 am ] |
| Post subject: | Re: Building a lift... |
tom, i noticed you suggested a 3 ring clevis with only 1 extra iso in the rear.... why not 2 extra in the rear with a 3 ring clevis.........?????? |
|
| Author: | riptricket [ Fri Jul 09, 2010 1:06 am ] |
| Post subject: | Re: Building a lift... |
Front: I want HD coils I want a winch and bumper eventually so should I go with the OME790:FRONT COILS FOR CRD (also works with GAS model w/ARB front bumper and winch) - $155 PAIR http://www.boulderbars.com/kjproducts.htm Teraflex bumpstops SKU: 1903200 Price: $21.99, pair is $43ish http://www.teraflex.biz/products/front- ... jeeps.html 3 Conduits per side... maybe 2 to start until I get my bumper and winch. Couple $$ Rear: I want HD coils OME948: REAR COILS FOR CRD/GAS KJ $151.55 PAIR http://www.boulderbars.com/kjproducts.htm Bumpstops... 2 hockey pucks or Daystar bumpstops? 2 Isolators for each side from stealership correct? Couple $$ OME-N132L $84.99 each, $170 PAIR http://www.boulderbars.com/OME-N132L_jeep_liberty_long_travel_shocks.htm Does this sound like all that I need for the lift? |
|
| Author: | STINGN [ Fri Jul 09, 2010 2:32 am ] |
| Post subject: | Re: Building a lift... |
you can go 3 conduit nuts right of the bat with the OME coils up from. go with the 790s if you are getting a bumper down the road. go with bilstein shocks front and back, just because rancho is hard to find now. and for the rear, get the rear hd coils and add 1 or two upper isos per side on the top from dealer. that should do it 
|
|
| Author: | tommudd [ Fri Jul 09, 2010 7:53 am ] |
| Post subject: | Re: Building a lift... |
"IF" you are going to install a bumper right away with a winch then go 790s if not then I would not. Listen to people who have actually ran the 790s  I ran mine with 927s and ARB up front ( no winch) for over 100,000 miles. It settled about 1/2 to 5/8 of an inch over that time, which I just added some clevis and brought it back up. Ride was nothing short of fantastic, now with the ARB still no winch the 790s are a rougher ride for sure, good out on the road and on trails but way firmer. I really think with no bumper don't use the 790s If you want same as Frankenlift then go with OME 927s, that what they use to build them, and there are ways to get the same height as a Franky real easy |
|
| Author: | tommudd [ Fri Jul 09, 2010 7:55 am ] |
| Post subject: | Re: Building a lift... |
digglesworth wrote: tom, i noticed you suggested a 3 ring clevis with only 1 extra iso in the rear.... why not 2 extra in the rear with a 3 ring clevis.........?????? your butts going to be about 3/4 of an inch higher depending how it settles. I don't like that look personally but depends on what you like. You can always add one in 5 or ten minutes of time later down the road if you want |
|
| Author: | digglesworth [ Fri Jul 09, 2010 9:12 am ] |
| Post subject: | Re: Building a lift... |
yeah i dont like that look either and was thinkin its just as easy to add or subtract one later....... |
|
| Author: | riptricket [ Fri Jul 09, 2010 1:02 pm ] |
| Post subject: | Re: Building a lift... |
alright so then this is everything that I need? Front: I want HD coils OME927: FRONT COILS FOR GAS KJ - $151.55 PAIR are these the heavy duty ones... http://www.boulderbars.com/kjproducts.htm Teraflex bumpstops SKU: 1903200 Price: $21.99, pair is $43ish http://www.teraflex.biz/products/front-%20...%20jeeps.html 3 Conduits per side... maybe 2 to start until I get my bumper and winch. Couple $$ Rear: I want HD coils OME948: REAR COILS FOR CRD/GAS KJ $151.55 PAIR http://www.boulderbars.com/kjproducts.htm Bumpstops... 2 hockey pucks or Daystar bumpstops? I seriously don't have any hockypucks so should I just go buy some or is there something better to do? 2 Isolators for each side from stealership correct? Couple $$ OME-N132L $84.99 each, $170 PAIR http://www.boulderbars.com/OME-N132L_jeep_liberty_long_travel_shocks.htm Does this sound like all that I need for the lift? |
|
| Author: | tommudd [ Fri Jul 09, 2010 1:31 pm ] |
| Post subject: | Re: Building a lift... |
Pretty much will do it You can buy 4 hockey pucks for like 4 bucks, drill a hole through the center and bolt them on, ( will need to drill a hole through the lower spring perch as well, need some good bits |
|
| Author: | riptricket [ Fri Jul 09, 2010 1:41 pm ] |
| Post subject: | Re: Building a lift... |
and I do need the teraflexs for the front right? |
|
| Author: | digglesworth [ Fri Jul 09, 2010 4:15 pm ] |
| Post subject: | Re: Building a lift... |
yes. terraflex's are the way to go. popout your stock bumpstops and the terraflex's just pop right in like the stock ones came out...... if you keep your stock a-arms they wil do just the way they are but if you do decide to go with aftermarket a-arms(JBA'a), youll have to notch the bottom of those terraflex's to make sure you dont smash the grease fittings on the arms |
|
| Author: | infernicus [ Fri Jul 09, 2010 4:25 pm ] |
| Post subject: | Re: Building a lift... |
Terraflex Front Bumpstops with notch cut out for Al's A-Arms. 
|
|
| Author: | digglesworth [ Fri Jul 09, 2010 4:27 pm ] |
| Post subject: | Re: Building a lift... |
just like that. just did it to mine today as a matter of fact. 
|
|
| Author: | riptricket [ Sat Jul 10, 2010 3:00 am ] |
| Post subject: | Re: Building a lift... |
i probably will not be getting als a-arms though...I think that I am all set for my lift with yalls help! |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|