| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 10mm Trim Packer for an OME948 Rear Spring??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=54306 |
Page 1 of 1 |
| Author: | Cobalt-60 [ Fri Jul 16, 2010 3:22 pm ] |
| Post subject: | 10mm Trim Packer for an OME948 Rear Spring??? |
Anybody know what the part number is for the OME trim spacer (you know, the little yellow plastic ring that sits on top of the spring) for a set of OME948 REAR Springs and where to buy one that is the proper size? My OME lift is level in the front (21.875" each side), but the rears are about 1/2' different (Left = 21.625", Right = 22.125"), so I am looking to level it out. Thanks. |
|
| Author: | ATXKJ [ Fri Jul 16, 2010 6:10 pm ] |
| Post subject: | Re: 10mm Trim Packer for an OME948 Rear Spring??? |
don't know a number - but call All-J's they had them |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|