I finally received my ARB Pump it up kit for my RDCKA compressor(darn amazon) and I was wondering if anyone on here has tried this kit. How does it install!? It came with no instructions and also will it work if im already driving front and rear lockers?

_________________
04 Rocky mountain KJ (SOLD)
OME Front Kit 790 springs on OME NS131s
skyjacker rear shocks and springs
ARB Deluxe bumper w/ Warn 9500i
Skid plates all under
ARB On-board Air w/ Front & Rear Air Lockers
JBA 4.5 UCA's
Lots O' Lights

"If it ain't broke...it might be after i try this!"

make a manifold to tap into:


I got the blue fittings at our local harbor freight discount tool store and joined them together w/ a union. The air nipple ( i said nipple!) was replaced w/ a quick disco, but this pic should give you an idea to work w/.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

Hmm my whole compressor is under my passenger seat so I wanted to keep it all under there I just don't know where to go with it

_________________
04 Rocky mountain KJ (SOLD)
OME Front Kit 790 springs on OME NS131s
skyjacker rear shocks and springs
ARB Deluxe bumper w/ Warn 9500i
Skid plates all under
ARB On-board Air w/ Front & Rear Air Lockers
JBA 4.5 UCA's
Lots O' Lights

"If it ain't broke...it might be after i try this!"

well, you can still mount the manifold anywhere you want, just have to plumb a line to it. YOu could mount it in the cargo area, under the hood, pretty much anywhere, even splitting it into 2 lines w/ connections at each end of the vehicle.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

I got an email back fro
ARB, I just need to pull the pressure switch and run the T-fitting to it.

_________________
04 Rocky mountain KJ (SOLD)
OME Front Kit 790 springs on OME NS131s
skyjacker rear shocks and springs
ARB Deluxe bumper w/ Warn 9500i
Skid plates all under
ARB On-board Air w/ Front & Rear Air Lockers
JBA 4.5 UCA's
Lots O' Lights

"If it ain't broke...it might be after i try this!"