I have a 06' CRD and want to put in a brake controller. Its got the 7 pin already wired. Any info or leads to good threads would be greatly appreciated.

Thanks in advance

Did it come with the 7 pin wiring from the factory? Im only familiar with the gasser, but mine had the blue brake controller wire ran from under the dash back to the hitch from the factory. It was grouped with a bunch of wires behind a cover under drivers side dash. All I had to do then was run power from the battery through the firewall and find the correct wire coming from the brake pedal. Not a real hard install at all.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

Yes it came like that from the factory. Yeah i see what you mean about easy install, i got my break controller today and all it has are 4 wires one black which is battery, one blue which is brake, one red which is stop light and one white which is ground.

will go look for the blue wire hidden under dash.

thanks Jeepjeepster

Out of your new Brake Control Unit,
Your brake control wire (blue wire) goes to this:

http://www.jeepkj.com/forum/showthread. ... controller


Your Cold brake light switch wire (red wire) goes to the wire that fires up when you step the brakes by the brake switch.

White is solid ground, should be direct to battery.

Black is fused 12V power. A self reset fuse of at least 20 Amps.

Good luck
Roland

A sincere thanks to our friends at KJ Country- there is alot of useful stuff over there!

_________________
2006 CRD LTD 2.8L VM Motori turbo,CAC, 100K-new timing belt
ORM-SEGR, Trans cooler, CLIII hitch front/rear, Journey HD controller
Mopar skids,"Stone Soup" rails, KK clevis fork 1" mild lift w/Daystar stops
215x85 LRD BFG Commercial A/T's, Rola Rack, V6 airbox, Fumoto valve
10K winch, B5 Biodiesel (ULSD CP3 lube)
Its a Diesel baby!

Thanks guys for the help. It all helped! Its all installed, works great. cheers