Here is my idea...
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Bigger front bump stops http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=56568 |
Page 1 of 1 |
| Author: | PathFinder7 [ Sun Oct 31, 2010 1:51 pm ] |
| Post subject: | Bigger front bump stops |
I have the Teraflex bump stop currently, but I still get some gnarley rubbing up top when fully loaded. Here's what I have: http://www.quadratec.com/products/16197_7000.htm I need something about an inch more. Anybody know of bigger ones? Thanks! |
|
| Author: | DirtyKK [ Sun Oct 31, 2010 6:42 pm ] |
| Post subject: | Re: Bigger front bump stops |
those are the only after market ones available for the Liberty. you could try adding some sort of block or spacer to the top of your ucas though. |
|
| Author: | tommudd [ Sun Oct 31, 2010 7:41 pm ] |
| Post subject: | Re: Bigger front bump stops |
If you are hitting that bad are your shocks blown possibly ? |
|
| Author: | jeepetorp [ Mon Nov 01, 2010 12:26 pm ] |
| Post subject: | Re: Bigger front bump stops |
Here is my idea...
|
|
| Author: | devlish [ Mon Nov 01, 2010 2:08 pm ] |
| Post subject: | Re: Bigger front bump stops |
really? i give those zipties 2-3 good movements before they twist/snap... perhaps a hose clamp at the very least. |
|
| Author: | jeepetorp [ Mon Nov 01, 2010 7:29 pm ] |
| Post subject: | Re: Bigger front bump stops |
devlish wrote: really? i give those zipties 2-3 good movements before they twist/snap... perhaps a hose clamp at the very least. Well... I had these for 1,5 years on my stock upper control arm, and they where still there when I removed them this weekend...  But they don´t fit so tight on JBAs arms, so maybe youre right... Then I buy new one for 25 dollar or so... 
|
|
| Author: | PathFinder7 [ Wed Nov 03, 2010 12:58 am ] |
| Post subject: | Re: Bigger front bump stops |
Thanks for the input gents. I'm gonna try your solution jeepetorp, got one of those tow bumps for $7. Need to cut and fit. I'll likely epoxy them or some such to my JVA arms. Thanks. |
|
| Author: | LoveLauren [ Thu Nov 04, 2010 10:32 pm ] |
| Post subject: | Re: Bigger front bump stops |
ive got some big bump stops from skyjacker. i dont now if they are bigger than the teraflex but i kno they are gigantic compared to the stock ones... these things were a pain to put in. i almost thought they werent made for my kj lol  
|
|
| Author: | tommudd [ Thu Nov 04, 2010 10:47 pm ] |
| Post subject: | Re: Bigger front bump stops |
Skyjacker bumpstops are smaller |
|
| Author: | Megalos [ Thu Nov 04, 2010 11:15 pm ] |
| Post subject: | Re: Bigger front bump stops |
couldn't some hard rubber be epoxied onto the end of the teraflex bumpstops? This can't be that difficult to fix, can it?! |
|
| Author: | devlish [ Fri Nov 05, 2010 9:43 am ] |
| Post subject: | Re: Bigger front bump stops |
jeepetorp wrote: Well... I had these for 1,5 years on my stock upper control arm, and they where still there when I removed them this weekend... But they don´t fit so tight on JBAs arms, so maybe youre right... Then I buy new one for 25 dollar or so... hey that's cool then!!! i'll admit when i'm wrong. gotta give credit to the zip tie!!  and i guess, what's a few cents for a new ziptie huh? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|