Half of what holds them on will be cut off
Doesn't look right but thats just my
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| I looked but Couldn't find http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=57310 |
Page 1 of 1 |
| Author: | RED_KJ_666 [ Sat Dec 04, 2010 1:37 pm ] |
| Post subject: | I looked but Couldn't find |
Has anyone cut there stock front fenders, in a similar fashion to the way the JK guys are cutting there's? I'm going for it next weekend. |
|
| Author: | omGoddard [ Sat Dec 04, 2010 1:57 pm ] |
| Post subject: | Re: I looked but Couldn't find |
Also wondered if anyone has done this. Looking forward to seeing how it turns out. |
|
| Author: | JeepMorrison [ Sat Dec 04, 2010 2:51 pm ] |
| Post subject: | Re: I looked but Couldn't find |
i havent seen it done to the KJ, just do it, and post pics |
|
| Author: | DirtyKK [ Sat Dec 04, 2010 3:00 pm ] |
| Post subject: | Re: I looked but Couldn't find |
I believe JeepBumm did it on his SFA CRD |
|
| Author: | tommudd [ Sat Dec 04, 2010 10:40 pm ] |
| Post subject: | Re: I looked but Couldn't find |
Half of what holds them on will be cut off Doesn't look right but thats just my
|
|
| Author: | daspes [ Sun Dec 05, 2010 11:08 am ] |
| Post subject: | Re: I looked but Couldn't find |
Unlike the JK, the KJ'a aren't going to gain any room by cutting. Secondly, with the IFS you are already limited on uptravel, so there isn't anything to be gained in that department either. If you cut them it would be purely for looks, and I'm not sure about that either. |
|
| Author: | RED_KJ_666 [ Sun Dec 05, 2010 4:04 pm ] |
| Post subject: | Re: I looked but Couldn't find |
Don't forget I have 33's in there lol. Also there is about 3" overall to be gained especially with the 33x12.5's they hook the flair at full lock and up travel. My thought was to "JK Trim them" and cut the channel they run in on the bumper off. My inner fenders are already gone and so are all of the factory fasteners, I picked up some stainless bolts and bolted them to the fender. That should be the last remaining point of contact between the tires and the jeep. I also relocated the washer bottle using one from a grand cherokee to retain the rear wash pump. So did you actually cut your fender daspes? If so got any pictures? |
|
| Author: | JeepBumm68 [ Sun Dec 05, 2010 5:03 pm ] |
| Post subject: | Re: I looked but Couldn't find |
just look up my post. we cut the stock front flares. but we also plan to fill the gap with 37's |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|