It is currently Thu Nov 05, 2026 3:52 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Installing dash mount winch controls
PostPosted: Mon Dec 13, 2010 4:20 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2523
Location: LOST in Wisconsin
Anybody done this already? I'm looking for a good location to mount the switches. This will be two switches, a master arm switch with an indicator light and a control switch, self centering 3 position toggle switch.

First thought was overhead. I don't have and evic or sunroof or anything else up there so a little box mounted above the mirror with the arm switch and winch control switch. This will be out of the way and easy to reach with my right hand. Considering puting a couple extra switches in for roof and accessories. Can be operated by the driver or passenger.

Second option is to mount a box on top of the dash to the left of the instrument cluster. Easy operation with my left hand and easy to reach into the vehicle and operate the controls.

third option is to mount the switches directly onto the A pillar just above or below the grab handle. again out of the way but easy to use while standing next to the vehicle.

Thoughts and suggestions?

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
 Post subject: Re: Installing dash mount winch controls
PostPosted: Mon Dec 13, 2010 4:28 pm 
Offline
LOST Newbie

Joined: Fri Jun 04, 2010 1:51 pm
Posts: 94
Location: Cold Lake, Alberta
If you're running a Warn winch, they make a cool wireless controller (I'm sure that other brands do too). Way more versatile than being tied to the vehicle during winching ops. Especially when performing a self recovery operation. Just my :2cents: and a practicle alternative to vehicle mounted controls. I have it and it's pretty cool and easy to use.

_________________
Ian

2005 KJ Renegade, ARB'd, OME'd, Rancho'd, Warn'd, skid'd, JBA 4.5s, Cragar Soft 8s, GY MTs 31x10.5x15, and dirty, can't forget the dirty.


Top
 Profile  
 
 Post subject: Re: Installing dash mount winch controls
PostPosted: Mon Dec 13, 2010 5:56 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2523
Location: LOST in Wisconsin
Thanks, Consider it and decided against wireless. I've forgoten the wired controller before so its not a stretch for me to forget the wireless controller, or not be able to find it when I need it, or the battery be dead or, it gets tossed into the glove box and gets smashed by the flashlight I throw in there, or a hundred other things I can think of.

I want hard mounted controls so they are always there, available, not dependant on my memory or packing skills. :D

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com