LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

OME lift write up?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=58010		 Page 1 of 1
Author:  kegan [ Wed Jan 05, 2011 10:42 am ]
Post subject:  OME lift write up?
Ordered my ome springs 927 and 948. Deciding on some shocks/struts. I've been looking around for lift write ups. I've been able to find a few frankenlift write ups. It seems fairly straight forward. However, I've yet to find a write up on a ome lift with separate struts that haven't been assembled into the coil yet. Is this doable with an autozone spring compressor? What else is needed to assemble the coil and the strut? Any write ups out there?
Thanks,
Author:  tommudd [ Wed Jan 05, 2011 11:01 am ]
Post subject:  Re: OME lift write up?
Easiest way is to find a shop to compress them. The coils are very close together and hard to get any compressor in, not worth it in my book. The write up for a Frankenlift pretty much tells it all, some little tricks along the way but its not a hard job.
Like mentioned any shop with a wall mounted compressor can do the "shocks" and springs for you
Author:  Megalos [ Wed Jan 05, 2011 12:21 pm ]
Post subject:  Re: OME lift write up?
tommudd wrote:
Easiest way is to find a shop to compress them. The coils are very close together and hard to get any compressor in, not worth it in my book. The write up for a Frankenlift pretty much tells it all, some little tricks along the way but its not a hard job.
Like mentioned any shop with a wall mounted compressor can do the "shocks" and springs for you


Now that "I'VE" lifted my Renny, I can speak as an expert. I agree with Tom 100%. Let a shop do the compressing for you. The rest is straight forward if you have a couple of handy guys to help you out.

:goink:
Author:  tommudd [ Wed Jan 05, 2011 12:38 pm ]
Post subject:  Re: OME lift write up?
Megalos wrote:
tommudd wrote:
Easiest way is to find a shop to compress them. The coils are very close together and hard to get any compressor in, not worth it in my book. The write up for a Frankenlift pretty much tells it all, some little tricks along the way but its not a hard job.
Like mentioned any shop with a wall mounted compressor can do the "shocks" and springs for you


Now that "I'VE" lifted my Renny, I can speak as an expert. I agree with Tom 100%. Let a shop do the compressing for you. The rest is straight forward if you have a couple of handy guys to help you out.

:goink:



I'VE..........

Ok adding this to the list under Megalos.........
never ever help him again....
:-)r
Author:  tonycrd [ Wed Jan 05, 2011 12:50 pm ]
Post subject:  Re: OME lift write up?
Kegan, have a look at this:

viewtopic.php?t=26190&start=0

If you know what you are doing you can compress the springs yourself, but they are narrow and very tough...So be careful.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/