More than likely front will be higher of course depending on how much your front fabbed bumper weighs
front has shocks
rear Bilsteins F4-BE5-6458-H7s work well
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| opinions on this lift set up http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=58612 |
Page 1 of 1 |
| Author: | SilverLakeKJ [ Sat Jan 29, 2011 7:44 pm ] |
| Post subject: | opinions on this lift set up |
Front ome 927 springs (adding a fabed bumper) Bilstien BE5-D916-H0 strut 1/4 inch jba strut spacer 3/8 clevice spacer terreaflex bump stop Rear Rustys springs (Already have them or would go ome but will go to ome once they sag) Bilstiens not shure on part # 2 upper isolaters per side 2 hockey puck bump stops What are your thoughts on this set? will the back sit as high as the front? Any changes other than not using the rustys springs in the rear? I plan on running 31 10.50 r15 tires on 15x7 soft8 for trail tires. |
|
| Author: | tommudd [ Sat Jan 29, 2011 8:12 pm ] |
| Post subject: | Re: opinions on this lift set up |
More than likely front will be higher of course depending on how much your front fabbed bumper weighs front has shocks rear Bilsteins F4-BE5-6458-H7s work well |
|
| Author: | SilverLakeKJ [ Sun Jan 30, 2011 12:53 pm ] |
| Post subject: | Re: opinions on this lift set up |
What can I do to get a little more out of the rear? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|