LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Build your own Frankenlift? Where to get the stuff, part #s?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=58948		 Page 1 of 1
Author:  incucrash [ Wed Feb 16, 2011 8:58 pm ]
Post subject:  Build your own Frankenlift? Where to get the stuff, part #s?
Hello, I am considering buying the OME Lift kit from quadratec located here:

http://www.quadratec.com/products/76090_51X_PG.htm

Is this the same items in a frankenlift with the added "Proprietory Poly parts, Strut Top Plates, ,rear extended bump stops"?

What is used and where to get them?

Is there a money savings or should I stop being cheap and go frankenlift? lol
Author:  tommudd [ Wed Feb 16, 2011 9:24 pm ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
Frankenlifts are built from parts that only AllJs have and use, they have their parts special made.
What you have listed is just 4 springs and 4 shocks basically
Look at what JeepinByAl has
all of this has been posted before but
what you need is 4 springs most use OME 927 fronts, OME 948 rears if you want a little cheaper Bilstein makes an excellent shock and 4 shocks from them and 4 springs will set you back about 700
also need front bumpstops from Teraflex and can use hockey pucks for the rear
Think about how you're going to use yours, and what height you want to go

Thank you we appreciate your business :wink:
Author:  daspes [ Wed Feb 16, 2011 9:42 pm ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
tommudd wrote:
Frankenlifts are built from parts that only AllJs have and use, they have their parts special made.
What you have listed is just 4 springs and 4 shocks basically
Look at what JeepinByAl has
all of this has been posted before but
what you need is 4 springs most use OME 927 fronts, OME 948 rears if you want a little cheaper Bilstein makes an excellent shock and 4 shocks from them and 4 springs will set you back about 700
also need front bumpstops from Teraflex and can use hockey pucks for the rear
Think about how you're going to use yours, and what height you want to go

Thank you we appreciate your business :wink:


Tom maybe we should just sticky this info... :dizzy:
Author:  STINGN [ Wed Feb 16, 2011 9:55 pm ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
daspes wrote:
tommudd wrote:
Frankenlifts are built from parts that only AllJs have and use, they have their parts special made.
What you have listed is just 4 springs and 4 shocks basically
Look at what JeepinByAl has
all of this has been posted before but
what you need is 4 springs most use OME 927 fronts, OME 948 rears if you want a little cheaper Bilstein makes an excellent shock and 4 shocks from them and 4 springs will set you back about 700
also need front bumpstops from Teraflex and can use hockey pucks for the rear
Think about how you're going to use yours, and what height you want to go

Thank you we appreciate your business :wink:


Tom maybe we should just sticky this info... :dizzy:

no wonder he has 14k posts :ROTFL:

and I second the sticky already...let him give a WHOLEEEEEE write up, and then at the end say Rev. Mudd
Author:  ATXKJ [ Wed Feb 16, 2011 10:12 pm ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
STINGN wrote:
no wonder he has 14k posts :ROTFL:


no - it's 15493 - and I know he's talked about other things
- so not more than 1/2 can be 'what lift do I use?'
Author:  tommudd [ Wed Feb 16, 2011 10:57 pm ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
:ROTFL: :ROTFL: :ROTFL:
Someday I going to post up "what I think and what is the most used " as far as lifts and make it a sticky for sure.
Author:  Pote [ Fri Mar 04, 2011 11:36 am ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
All my parts are freshly ordered up per Tom's "stickiness". Thanks Tom and see ya on the 18th for the big day. BTW, I am also ordering the A-Arms...what the hell, its just more money I don' t have! :ROTFL: It was kind of you to help me spend it too. :5SHOTS:
Author:  tommudd [ Fri Mar 04, 2011 2:32 pm ]
Post subject:  Re: Build your own Frankenlift? Where to get the stuff, part
yellocoyote wrote:
Sadly, making a topic a "sticky" won't make people read it... :roll:

It'll serve the same purpose as the SEARCH button.



You know everytime I just suggest someone read through and search to someone looking at lifts, there are always one or two that jump me for not being kind and gentle enough with the OP.
So trying to keep peace in the family I write it all out for them.
Of course someone else comes along and says I'm a know it all, :ROTFL: :shock: :ROTFL:
So you know what?
I'm going to just keep on keepin' on with what I been doing.
It keeps me from drinking ( well most of the time) :ROTFL: :ROTFL: :ROTFL:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/