I'm about to do an OME lift and was wondering what the torque specs are on everything involved in this lift including UCAs. I tried the search function but just got really frustrated. Any help would be greatly appreciated.

_________________
'04 Sport
OME 927/948 w/ Boiler 3/8" shim, 3 ring clevis and LTT 1" rear spacer
Bilsteins all around
JBA 4.5s
265/75/16 Treadwright Wardens on Moabs

80 ft/lbs top 4 bolts for the shock tower

60 upper ball joint nut

tie rod nut , 80 ft/lbs

the tie rod stud likes to turn on reinstall, a 10mm socket or wrench to hold the stud is necessary about 110% of the time until the nut gets past the fubar threads

100 ft/lbs lower clevis bolt
100 ft/lbsupper clevis bolt

upper control arm chassis mount nuts 80 ft/lbs
torque them to about 60 in the air, once it's back on the ground with weight on the wheels, loosen them a turn and retorque to 80

lower sway bar link nut (swaybar link to knuckle) 85 ft/lbs

lug nuts - compound 85-100

26 ft/lbs on the brake caliper guide pins, IF you remove them - it isn't necessary

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

Thanks I appreciate it.

_________________
'04 Sport
OME 927/948 w/ Boiler 3/8" shim, 3 ring clevis and LTT 1" rear spacer
Bilsteins all around
JBA 4.5s
265/75/16 Treadwright Wardens on Moabs