| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Torque specs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=59439 |
Page 1 of 1 |
| Author: | EricR [ Sat Mar 12, 2011 5:02 pm ] |
| Post subject: | Torque specs |
I'm about to do an OME lift and was wondering what the torque specs are on everything involved in this lift including UCAs. I tried the search function but just got really frustrated. Any help would be greatly appreciated. |
|
| Author: | JeepinJarhead03 [ Sat Mar 12, 2011 6:53 pm ] |
| Post subject: | Re: Torque specs |
80 ft/lbs top 4 bolts for the shock tower 60 upper ball joint nut tie rod nut , 80 ft/lbs the tie rod stud likes to turn on reinstall, a 10mm socket or wrench to hold the stud is necessary about 110% of the time until the nut gets past the fubar threads 100 ft/lbs lower clevis bolt 100 ft/lbsupper clevis bolt upper control arm chassis mount nuts 80 ft/lbs torque them to about 60 in the air, once it's back on the ground with weight on the wheels, loosen them a turn and retorque to 80 lower sway bar link nut (swaybar link to knuckle) 85 ft/lbs lug nuts - compound 85-100 26 ft/lbs on the brake caliper guide pins, IF you remove them - it isn't necessary |
|
| Author: | EricR [ Sat Mar 12, 2011 8:34 pm ] |
| Post subject: | Re: Torque specs |
Thanks I appreciate it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|