LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

JBA 2.5" Lift Springs
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=59481
Page 1 of 1

Author:  rh03kj [ Mon Mar 14, 2011 6:06 pm ]
Post subject:  JBA 2.5" Lift Springs

So I was shopping around for the best price on a set of rear lift springs, OME of course and I came across these:

http://jeepinbyal.com/prod-Rear_coil_springs_for_2_5__lift-10.aspx

Does anyone have any info about them? Anyone ever used them yet? The price seems pretty decent for two springs. These are replacements just like OME right, not for the adjust a strut setups.

thanks.

Author:  Dave08 [ Mon Mar 14, 2011 7:00 pm ]
Post subject:  Re: JBA 2.5" Lift Springs

Don't remember spring rate, but I know some people use the JBA 4" coils in the rear with OME+ stuff in the front. So I'd guess OME alone in the front would about about right for these. But they're only 20 bucks cheaper than OME.

Author:  SweepnChoke [ Thu Mar 17, 2011 8:11 am ]
Post subject:  Re: JBA 2.5" Lift Springs

I have them on mine and don't really have any complaints. The front is OME HD coils with a 2 conduit nut clevis lift and the extra weight of the ARB bumper. I carry about 200lbs of gear in the back of the jeep. So with the weight in the back and the JBA 2.5" rear coils, I need 2 upper ISO's over each rear coil in order to level the rear with the front.

Author:  RED_KJ_666 [ Sun Mar 20, 2011 12:11 pm ]
Post subject:  Re: JBA 2.5" Lift Springs

LIB25R... SkyJacker

Author:  JeepinJarhead03 [ Tue Mar 22, 2011 11:42 pm ]
Post subject:  Re: JBA 2.5" Lift Springs

the jba25's are about 25lbs heavier rate than the ome948s

front and rear steels, tank skid, heavy cargo load I'm still an inch nose low with 927s+3 conduits+3/8th upper spacer in the front, the rear is jba25 + 3 total upper iso's

they're perfect to get the rear to ~ 23" unless you get custom steel rear you won't be lower than 23

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/