x2...put my
on poor alignment.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lifted......... but have a problem! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=59609 |
Page 1 of 1 |
| Author: | EricR [ Mon Mar 21, 2011 6:56 pm ] |
| Post subject: | Lifted......... but have a problem! |
This weekend I installed the OME 927/948 springs along with Boilers 3/8" top shim and 3 ring clevis. Also installed Bilsteins, JBA 4.5 UCAs, Moog LBJs and Moabs wrapped with 265/75/16 Wardens. The alignment was done this morning and was brought back into spec but the jeep is walking all over the place going down the road. Any thoughts on what the issue might be? The Libby is a 4x2 by the way. |
|
| Author: | BugginKJ [ Mon Mar 21, 2011 7:04 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
Poor alignment or something is loose. |
|
| Author: | tonycrd [ Mon Mar 21, 2011 7:58 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
x2...put my on poor alignment.
|
|
| Author: | EricR [ Tue Mar 22, 2011 8:22 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
Re-installed the rear swaybar and the issue went away. Thanks for the replies guys! |
|
| Author: | tonycrd [ Tue Mar 22, 2011 8:27 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
Dumb question, but what is an LTT 1" spacer? |
|
| Author: | EricR [ Tue Mar 22, 2011 8:32 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
Long_tall_texans alternative to using iso's. |
|
| Author: | JeepinJarhead03 [ Tue Mar 22, 2011 11:36 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
if the rear sway is preventing it from walking, may want to take a look at your rear bushings / uca-bj |
|
| Author: | Pote [ Wed Mar 23, 2011 12:15 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
EricR wrote: Re-installed the rear swaybar and the issue went away. Thanks for the replies guys! hmm. When I just had mine done, I was asked if I wanted the rear sway bar on or off, as its been said by many here that it absolutely does nothing. I just left it on, but if it does nothing, yours is masking a bigger problem right? |
|
| Author: | EricR [ Wed Mar 23, 2011 4:31 pm ] |
| Post subject: | Re: Lifted......... but have a problem! |
I'll check the bushings and such when I retorque everything. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|