Rusty's front spacers?

JQLiberty · **Posted:** Sat Feb 18, 2006 6:13 pm

Has anyone used these spacers from Rusty's to level out the front of their jeep?

[/img]

raceinfan · **Posted:** Sat Feb 18, 2006 6:45 pm

YES

as a matter of fact I have them in right now,levels the KJ nicely & still maintains the factory ride,it will sit alittle higher up front till they get settled in which won't take long at all maybe a week or so,I've had them in a month now no problems

KJ04 · **Posted:** Sat Feb 18, 2006 8:49 pm

A 3/8" clevis lift will give you the same results with no exspence and far less effort envolved to do it.

the1jferg · **Posted:** Sat Feb 18, 2006 10:37 pm

Gives you 1 1/2" lift... It don't really settle, only plays tricks on your eyes.

I'm running them.

I think dollar for dollar if you ain't wanting to go real high, can't beat the price.

You can throw another upper Isolator on the rear springs if you want to get it up 1/2" above level.

I'd like to know why nobody doubles up on the rear bottom pads? Even if they don't stack naturally, you could make a spacer ring out of it by cutting it.

You could make a rear spacer out of 3/4" plywood, paint it, Put it under the bottom pad, and I bet it would last forever. LOOK OUT....(Poor Man's rear lift).

http://www.thefergusons.us/kj/kj.htm

raceinfan · **Posted:** Sat Feb 18, 2006 10:44 pm

mine does sit level,I'll take some measurements when it get's warmer,it did at first but since has changed I'm positive of it

Eddo · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 1214

I had them in my garage at one time. They are identical to the 1.5" Daystar spacers.

japracer4 · **Posted:** Sun Feb 19, 2006 1:32 pm

does anyone have a picture of their kj with just the spacer installed. I am having a heck of a time deciding on what to do suspension wise.

the1jferg · **Posted:** Sun Feb 19, 2006 1:50 pm

Do a search, the pics are on the site. I think KJRenny posted some.

raceinfan · **Posted:** Sun Feb 19, 2006 2:11 pm

here's one,2 days after install
[img][img]http://img325.imageshack.us/img325/233/dscf00015ho.th.jpg[/img][/img]

Edwin · **Posted:** Mon Feb 20, 2006 9:00 am

Eddo wrote:

I had them in my garage at one time. They are identical to the 1.5" Daystar spacers.

Yea, they look like what's on the Frankinlift.

Rusty's front spacers?

Who is online