| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Mopar Transmission Skid Plate http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=61095 |
Page 1 of 1 |
| Author: | Country_Rob [ Tue Jun 07, 2011 12:58 pm ] |
| Post subject: | Mopar Transmission Skid Plate |
Howdy all, Would someone with a Mopar transmission skid plate installed on their KJ rig be willing to take rough measurements of the skid plate for me? I have a gasser and I'm looking to install one on a 2004 KJ, but I want to make sure it will work before I plunk down some money. Thanks in Advance!! Rob K. |
|
| Author: | JL Rockies [ Tue Jun 07, 2011 1:13 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
Fitment is a small issue, protection is a bigger issue. When it folds it actually works as a damage multiplier... don't even get me started on MOPAR trans skids. |
|
| Author: | NCC-1864 [ Wed Jun 08, 2011 11:11 am ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
JL Rockies wrote: Fitment is a small issue, protection is a bigger issue. When it folds it actually works as a damage multiplier... . X2 |
|
| Author: | KJ_WHEELER_2010 [ Sat Jun 11, 2011 11:19 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
Bro if your gonna spend the change on skids dont go Mopar they are crap. A skidplate should be able to hold up to some HARD hits thats what they are for. Everytime I see Mopars they are bent to hell. |
|
| Author: | Country_Rob [ Mon Jun 13, 2011 2:28 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
Guys, Thanks for all of your comments. It seems that the only skid plate I can find, other than Mopar, is Skid Row. Skid Row is just too pricy compared to the Mopar. I realize you get what you pay for, but is there some other skid plate that isn't crap that falls in between the Mopar and Skid row prices? Thanks again!! Rob K. |
|
| Author: | Jackson02 [ Tue Jun 14, 2011 10:08 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
i built my own out of 3/16th plate. |
|
| Author: | eyehatetofu [ Tue Jun 14, 2011 10:55 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
I don't think the Mopar Trans skid is all that bad. Yes, I have taco'd one, but to be fair, it was given some pretty serious abuse. Have beat the snot out of it (first one, new one has only a few trips on it) in the AZ rocks many of times, and it lasted almost 2 years. Plus, I don't mind spending $50-60 to buy a new one. Better protection than nothing and at a fraction of the price of the Skid Row skid. Aren't they running $300+? |
|
| Author: | dgeist [ Fri Jun 17, 2011 5:06 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
Country_Rob wrote: Howdy all, Would someone with a Mopar transmission skid plate installed on their KJ rig be willing to take rough measurements of the skid plate for me? I have a gasser and I'm looking to install one on a 2004 KJ, but I want to make sure it will work before I plunk down some money. Thanks in Advance!! Rob K. Rob, I don't have the measurements handy, but I do know (from my own search) that there's really only a couple variants. One fits the very early 45RFE auto-trans gassers and the 2005-2006 CRDs and the other fits pretty much everything else. The new ones you'll buy from mopar will likely fit all except the models with the (5)45RFE transmission. Some years have a little angled blot tab in the front and some don't, but I don't think it'll prevent it from fitting. Dan |
|
| Author: | KJ_WHEELER_2010 [ Sat Jun 18, 2011 12:39 pm ] |
| Post subject: | Re: Mopar Transmission Skid Plate |
I mean I guess the Mopar skids would work for your average wheeler. They are better than nothing |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|