I ordered it on Monday!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Frankenlift for the Renegade http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=61390 |
Page 1 of 2 |
| Author: | brettacuff [ Sat Jun 25, 2011 5:37 pm ] |
| Post subject: | Frankenlift for the Renegade |
I have decided to go with the NEW!! Frankenlift II BAJA Kit for GAS KJ from All J Products. I am going to be ordering it next week. Has anyone ever ordered from here? Since my 04 Renegade has 90k miles how much do you think this will raise my ride height? And this will make it ride smoother correct? Thanks Brett |
|
| Author: | kskj [ Sat Jun 25, 2011 6:24 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
You will like it. Four inches or so of lift, great ride. I drove a high speed dirt/sand track trail for 50 miles in Utah a few weeks ago and was really impressed how it handled the twist and turns and dry creek beds. Far as All J's go, great products and service. |
|
| Author: | TAHOE [ Sat Jun 25, 2011 11:07 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
Let me kn0w if ya need help installin |
|
| Author: | teckman02 [ Sat Jun 25, 2011 11:38 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
hey cincy M&G? |
|
| Author: | brettacuff [ Sun Jun 26, 2011 11:12 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
I am glad to hear that. And thanks. teckman02 wrote: hey cincy M&G? Sounds good to me! |
|
| Author: | brettacuff [ Sun Jun 26, 2011 11:21 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
Now comes the real question. What is the biggest size tire I can fit with the Frankenlift 2 with no cutting/rubbing? Remember my KJ is mostly for on road driving. |
|
| Author: | STINGN [ Sun Jun 26, 2011 11:39 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
245/75/16 |
|
| Author: | JumpsInPuddles [ Mon Jun 27, 2011 3:55 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
STINGN wrote: 245/75/16 Is that due to height or width? Could you go with a 235/85r16? |
|
| Author: | jmark [ Mon Jun 27, 2011 3:57 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
Just put the Baja in on my '04 KJ, very impressed thus far. Hoping it'll hold up for a LONG time (dont want to do that job again anytime soon) |
|
| Author: | tommudd [ Mon Jun 27, 2011 4:17 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
JumpsInPuddles wrote: STINGN wrote: 245/75/16 Is that due to height or width? Could you go with a 235/85r16? You could but you'll lose a bunch of power and mileage overdrive will be off most of the time and it will run hotter been there done that before I regeared 245-75 or 265-70s almost the size height |
|
| Author: | riptricket [ Tue Jun 28, 2011 12:02 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
my rear is sagging... i have two lower isos, can i put another iso down or do i need to do an upper instead? |
|
| Author: | brettacuff [ Tue Jun 28, 2011 9:41 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
Would 265-70s require any trimming? |
|
| Author: | brettacuff [ Wed Jun 29, 2011 9:47 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
I ordered it on Monday!
|
|
| Author: | brettacuff [ Fri Jul 01, 2011 11:28 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
Should I install the Frankenlift on Wednesday before I make the trek down to New Orleans on Friday next week? Or is this a bad idea? 1400 miles round trip |
|
| Author: | tommudd [ Fri Jul 01, 2011 11:46 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
Back in 05 when I did the first lift on mine, I installed it on a Friday morning, aligned Friday afternoon and headed for Orlando Saturday morning. No problems at all if done right 
|
|
| Author: | brettacuff [ Tue Jul 05, 2011 8:36 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
Would 265's require any sort of trimming or even a wider wheel? |
|
| Author: | tommudd [ Tue Jul 05, 2011 9:37 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
265 what? 70s or 75? Stock wheels and 265-70s will more than likely rub when fully turned and "may" rub on the UCA, also need to do the pinch weld as well and some bumper trimming 265-75s lots of cutting and no power |
|
| Author: | brettacuff [ Tue Jul 05, 2011 10:33 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
Well then. I suppose i will go with the 245s. |
|
| Author: | brettacuff [ Tue Jul 05, 2011 10:33 pm ] |
| Post subject: | Re: Frankenlift for the Renegade |
Well then. I suppose i will go with the 245s. |
|
| Author: | Megalos [ Wed Jul 06, 2011 10:25 am ] |
| Post subject: | Re: Frankenlift for the Renegade |
glider wrote: That 1" tire height change from 245/75/16 to 235/85/16 is magical. Things are perfect at 31" and the jeep is practically junk at 32"  Unless you have a 6spd...which makes the 32's frickin great! |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|