LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Identifying a lift already installed.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=61544		 Page 1 of 1
Author:  KJ/toy [ Thu Jul 07, 2011 8:15 am ]
Post subject:  Identifying a lift already installed.
I bought this KJ (2006 Renegade) in the fall of 2010. It already has a lift installed on it. I have an idea (spacer) but wanted to ask the experts.
Author:  tommudd [ Thu Jul 07, 2011 8:48 am ]
Post subject:  Re: Identifying a lift already installed.
Pictures of front and rear suspension would help to see what you have

Also measure from the middle of the wheel to bottom of the flare, that will tell us how much lift you have with whatever lift you have
Author:  KJ/toy [ Tue Jul 12, 2011 11:00 am ]
Post subject:  Re: Identifying a lift already installed.
I must not be smart enough to post the pictures that I took. :banghead:
Author:  At The Helm [ Tue Jul 12, 2011 11:37 am ]
Post subject:  Re: Identifying a lift already installed.
KJ/toy wrote:
I must not be smart enough to post the pictures that I took. :banghead:

viewtopic.php?f=65&t=2349
Author:  KJ/toy [ Wed Jul 13, 2011 7:41 am ]
Post subject:  Re: Identifying a lift already installed.
ImageImageImage



Center of wheel to flare 20.5. Thanks to all for their input to help me get these pictures on here.
Author:  tonycrd [ Wed Jul 13, 2011 7:46 am ]
Post subject:  Re: Identifying a lift already installed.
Can you post some bigger ones?

From what I can make out, the rear are Daystar pucks.
Author:  tommudd [ Wed Jul 13, 2011 10:06 am ]
Post subject:  Re: Identifying a lift already installed.
Agree with Tony
looks like a daystar from what I can see from the pictures
Now from the measurements looks as though you have about an inch to inch and a half of lift is all. What that means is the springs have sagged so much that you are not getting the full benefit from the spacer lift anymore.
Time to go full spring lift with new shocks front and rear
Bet your ride and handling will be 100 times better
Author:  KJ/toy [ Wed Jul 13, 2011 1:47 pm ]
Post subject:  Re: Identifying a lift already installed.
Not sure how to enlarge the pictures. Anyways ,I thought a spacer lift was on there. Will have to pick up some more cans along the road to pay for a full spring lift. Thanks to all for the info.
Author:  tommudd [ Wed Jul 13, 2011 6:56 pm ]
Post subject:  Re: Identifying a lift already installed.
I'll make sure that all we drink is out of cans at the next Meet and Greet up here. The week following I'll be down that way and I'll scatter them along the road for ya!
:ROTFL:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/