| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Questions... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=62211 |
Page 1 of 1 |
| Author: | ArmyKJ [ Tue Aug 23, 2011 10:54 am ] |
| Post subject: | Questions... |
1) What is the what i can only asume as a Balancer for on the rear diff. It looks like two round weights 2) JBA KJ Tri-Angulated 4 Link, anyone use it, have views about it, worth it. Ive tryed searching but might be using the wrong venacular. Thanks, Kris |
|
| Author: | SweepnChoke [ Tue Aug 23, 2011 2:40 pm ] |
| Post subject: | Re: Questions... |
ArmyKJ wrote: 1) What is the what i can only asume as a Balancer for on the rear diff. It looks like two round weights Congrats, your Jeep is a boy! Driveshaft counter balance if I remember right, & some have neutered their jeeps via removing them. |
|
| Author: | tommudd [ Tue Aug 23, 2011 3:38 pm ] |
| Post subject: | Re: Questions... |
1) yes its for driveline vibration, although may not be needed in most cases 2) More than likely worth it over 3.5 - 4 inches of lift |
|
| Author: | JeepinJarhead03 [ Tue Aug 23, 2011 3:54 pm ] |
| Post subject: | Re: Questions... |
yup yup thats ya jeep bawlz that jba stuff is high speed low drag bidness |
|
| Author: | RED_KJ_666 [ Tue Aug 23, 2011 5:00 pm ] |
| Post subject: | Re: Questions... |
If you threw a few extra $$$ at it over what they want for the JBA Upper arm kit you could have 4 Custom arms built and installed. The lower bushings don't like excessive flex lol. |
|
| Author: | ArmyKJ [ Mon Sep 12, 2011 12:06 am ] |
| Post subject: | Re: Questions... |
RED_KJ_666 wrote: If you threw a few extra $$$ at it over what they want for the JBA Upper arm kit you could have 4 Custom arms built and installed. The lower bushings don't like excessive flex lol. So I see you saying have one custom built, are the JBA ones fairly weak? Have they not performed as advertized? I hear nothing but good things out of JBA. |
|
| Author: | ArmyKJ [ Mon Sep 12, 2011 12:10 am ] |
| Post subject: | Re: Questions... |
tommudd wrote: 1) yes its for driveline vibration, although may not be needed in most cases So i guess the question to that is there any real reason to keep it on, just like removing the rear sway bar any performance effect, if so would a driveshaft balance rectify that? To that end, wouldnt they have to balance the driveshaft anyway? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|