| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Input shaft http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=62403 |
Page 1 of 1 |
| Author: | Drooldude [ Fri Sep 02, 2011 7:52 pm ] |
| Post subject: | Input shaft |
I have been diagnosed with a bad input shaft on the passengers side. Where can I get this fixed for a reasonable price in the Riverside CS area?
|
|
| Author: | ridenby [ Sat Sep 03, 2011 9:02 am ] |
| Post subject: | Re: Input shaft |
Define "input shaft". And where is CS. |
|
| Author: | Drooldude [ Sat Sep 03, 2011 2:56 pm ] |
| Post subject: | Re: Input shaft |
Meant CA and I do not know when I looked at the blowup of the assembly I do not see such a thing. My axel was replaced in April. Now its loose there trying to blame it on the daystar lift or something there calling the input shaft in the diff. Stan |
|
| Author: | ridenby [ Sat Sep 03, 2011 3:15 pm ] |
| Post subject: | Re: Input shaft |
Intermediate Shaft. http://www.jeep4x4center.com/jeep-axle- ... rty-kj.htm Number 24 ,lift has nothing to do with its life span. Should replace or check when replacing pass. CV axle. |
|
| Author: | tjkj2002 [ Sun Sep 04, 2011 8:58 pm ] |
| Post subject: | Re: Input shaft |
ridenby wrote: Intermediate Shaft. http://www.jeep4x4center.com/jeep-axle- ... rty-kj.htm Number 24 ,lift has nothing to do with its life span. Should replace or check when replacing pass. CV axle. A lift can and will effect it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|