I saw a write up on this awhile back when I first bought my jeep.
It has no washer bottle. I tracked one down with a pump.
My front bumper is cut and I'd like to relocate it behind the air box.

How do I go about this.

I know some form of a bracket needs to be made and the neck needs to be cut down.
But more detailed instructions would be much appreciated.

Thanks in advance.

Here is one version
viewtopic.php?f=98&t=56577&start=0

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3
Sold-1988 Suzuki Samurai
2002 Jeep TJ

fairly simple cut the neck off leaving 4-5 inches from the top, cut the hole in the washer bottle part just so the neck will slide down in, I used marine epoxy and sealed it in there good, let it dry and stuck it in behind the airbox, couple of small brackets and done

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited