| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How to relocate washer bottle behind air box? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=62738 |
Page 1 of 1 |
| Author: | Mr. eXtreme [ Tue Sep 20, 2011 12:06 pm ] |
| Post subject: | How to relocate washer bottle behind air box? |
I saw a write up on this awhile back when I first bought my jeep. It has no washer bottle. I tracked one down with a pump. My front bumper is cut and I'd like to relocate it behind the air box. How do I go about this. I know some form of a bracket needs to be made and the neck needs to be cut down. But more detailed instructions would be much appreciated. Thanks in advance. |
|
| Author: | infernicus [ Tue Sep 20, 2011 1:29 pm ] |
| Post subject: | Re: How to relocate washer bottle behind air box? |
Here is one version viewtopic.php?f=98&t=56577&start=0 |
|
| Author: | tommudd [ Tue Sep 20, 2011 4:40 pm ] |
| Post subject: | Re: How to relocate washer bottle behind air box? |
![]() ![]() ![]() fairly simple cut the neck off leaving 4-5 inches from the top, cut the hole in the washer bottle part just so the neck will slide down in, I used marine epoxy and sealed it in there good, let it dry and stuck it in behind the airbox, couple of small brackets and done |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|