| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How to cut cv shafts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=62818 |
Page 1 of 1 |
| Author: | vincennescrd [ Sun Sep 25, 2011 2:46 am ] |
| Post subject: | How to cut cv shafts |
Since my lift I thinking my cvs are hitting. How do you go about clearencing the shafts. Any help would be great |
|
| Author: | Ryn7 [ Tue Sep 27, 2011 2:19 am ] |
| Post subject: | Re: How to cut cv shafts |
You need to get your inner CV joints shortened by ⅜'s of an inch and make sure that whatever machine shop does it also machines a groove for the retaining band that holds the rubber CV boot in place. Or alternatively you can purchase a shortened CV joint/axle assembly. |
|
| Author: | JMSMN [ Tue Sep 27, 2011 3:03 pm ] |
| Post subject: | Re: How to cut cv shafts |
I thought they shaved 3/8" off of the cup. I could very well be mistaken. |
|
| Author: | Ryn7 [ Tue Sep 27, 2011 10:01 pm ] |
| Post subject: | Re: How to cut cv shafts |
Oops! Wrong key stroke! It should of read ⅜ of an inch. |
|
| Author: | bunkermonkeycw [ Wed Sep 28, 2011 2:57 pm ] |
| Post subject: | Re: How to cut cv shafts |
I am interested also... got a shop in mind. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|