LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Fender Rolling
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=62874		 Page 1 of 1
Author:  JeepJeff [ Wed Sep 28, 2011 4:11 pm ]
Post subject:  Fender Rolling
Do you guys and gals think it is worth it to prevent scraping?
Author:  tommudd [ Wed Sep 28, 2011 4:35 pm ]
Post subject:  Re: Fender Rolling
:? :?
What?
If what you speak of is like what we used to do to older (60s-70s cars) for more clearence in the fenderwell , theres not much you can do to a KJ . You can trim some off of the flares in the rear to stuff the tires more but not too much else unless you want to cut and hack like some do.
Author:  infernicus [ Wed Sep 28, 2011 4:35 pm ]
Post subject:  Re: Fender Rolling
I dont think its possible, definitely not as easy as an XJ or Subaru.
Author:  tjkj2002 [ Wed Sep 28, 2011 8:07 pm ]
Post subject:  Re: Fender Rolling
I cut alot of my rear flares off and "rolled" the outer lip of the rear fender well to tuck my tires up into the wells better without ripping the flares off.
Author:  JeepJeff [ Fri Sep 30, 2011 1:49 pm ]
Post subject:  Re: Fender Rolling
Thanks for the responses.. doesn't really seem like it is worth it yet. Probably cut further down the line. The tool to do it that I saw was around $200.. I think that I will hold off on it.

Thanks again!
Author:  ramlebliberty [ Fri Sep 30, 2011 7:00 pm ]
Post subject:  Re: Fender Rolling
Angle grinder & BFH can be had for around $30 if you take a visit to your local Harbor Freight!!
Author:  blackwidowkj06 [ Sat Oct 01, 2011 10:01 pm ]
Post subject:  Re: Fender Rolling
tommudd wrote:
unless you want to cut and hack like some do.


Oh, you mean me; right? :ROTFL:

JeepJeff, Tom is right. There's not much you can do to the Liberty. Alot of us have had to think out of the box to solve problems.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/