| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Shop says I need a CV joint replaced - $688??!! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=63852 |
Page 1 of 1 |
| Author: | B0bcat [ Sat Nov 26, 2011 2:22 pm ] |
| Post subject: | Shop says I need a CV joint replaced - $688??!! |
...so my wife takes it to the shop for said replacement then tells me there's a rearend grind as well. (?) So I call the shop and tell them to fix the rearend first. I'll know what that entails when the techs get back on Monday. Anticipating a big rearend rebuild bill, I'm needing to know from you guys what tools are necessary for me to replace a CV joint, where do I get the parts and doesn't $688 sound quite expensive?! Seems it's always something w/ this KJ! BTW, it's an 05 LTD that my wife and daughter drive. |
|
| Author: | infernicus [ Sat Nov 26, 2011 3:21 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Hey hey, welcome to LOST. That price isn't completely outrageous. If you have a place (and time) to work on your own Jeep, definitely do it yourself. It really isn't all that hard to do. Check out this post of mine from a while back. viewtopic.php?f=1&t=56509 Enjoy. 
|
|
| Author: | tommudd [ Sat Nov 26, 2011 3:29 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Welcome to LOST replacing the CV is pretty easy to do as mentioned above. If you have basic tools thats all you need really. If you post up where you live someone near by maybe able to help or walk you through it. Good luck |
|
| Author: | ATXKJ [ Sat Nov 26, 2011 9:15 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Howdy Welcome to LOST The dealership is charging you ~$400 for a new part and ~$100/hour to install so overall 688 isn't too bad. However if you can do it yourself - it'll probably take a little longer, plan for a Saturday - you can get a New part from Mopar Parts America - probably ~$300 - or you can get a NAPA rebuilt for ~$150. (do not get the Advance/PepBoys/AutoZone "new" CV's made in China - they're too short and will die quickly) |
|
| Author: | tommudd [ Sat Nov 26, 2011 9:34 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Where are you buying NAPA rebuilts at for 150????  I just picked up one the other day for 60 |
|
| Author: | ramlebliberty [ Sun Nov 27, 2011 7:30 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
tommudd wrote: Where are you buying NAPA rebuilts at for 150???? I just picked up one the other day for 60 It's about that much without getting the core charge back. Make sure you turn your old ones in! |
|
| Author: | tommudd [ Sun Nov 27, 2011 7:42 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Well then should be noted that CV is 50-60 bucks and 100-120 or so for the core charge. 
|
|
| Author: | ATXKJ [ Sun Nov 27, 2011 9:24 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Actually Tom - I figured you were getting the volume discount  I haven't had to get one for the KJ yet - so I just Googled it. |
|
| Author: | B0bcat [ Mon Nov 28, 2011 12:41 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Thanks for the help and the welcome guys! Right now I'm waiting on a phone call from the shop to see what the damage is on the rearend  ...then I'll decide on the CV.Thanx again! |
|
| Author: | tommudd [ Mon Nov 28, 2011 2:03 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
ATXKJ wrote: Actually Tom - I figured you were getting the volume discount I haven't had to get one for the KJ yet - so I just Googled it. I think I counted the other day I have 4 right side and two left side ones piled up out there in the corner of the garage. All are good to run, even have one that Al Handy rebuilt ( the original JeepinByAl) back in the day |
|
| Author: | B0bcat [ Tue Nov 29, 2011 9:19 pm ] |
| Post subject: | Re: Shop says I need a CV joint replaced - $688??!! |
Pickup the liberty tomorrow and pay a <$700 bill to have 4 bearings replaced in the rearends ring and pinion assembly. Perhaps at 180,000 miles I should expect some of this. CV next. Merry Christmas to me! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|