| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Top Plate / Mount differences http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=63962 |
Page 1 of 1 |
| Author: | j-rod [ Sat Dec 03, 2011 12:03 pm ] |
| Post subject: | Top Plate / Mount differences |
I am looking at top plates. either used or new. I found these at AAP: Monro: http://shop.advanceautoparts.com/webapp ... HASAMS____ which also gives the lower isolator. I have a coupon with another purchase making one of these free. also have KYB: http://shop.advanceautoparts.com/webapp ... ASAMS_____ Moog: http://shop.advanceautoparts.com/webapp ... SAMS_____# Compared to the $150 id pay for daystar top plates...and i havent found other sources for MOPAR ones..... are the Monro or KYB good enough? like I said. I have shocks, Im getting OME springs, and Id like to get the tops to make a quick strut for a quicker install. |
|
| Author: | At The Helm [ Sat Dec 03, 2011 12:41 pm ] |
| Post subject: | Re: Top Plate / Mount differences |
Don't forget you'll need 4 front spring isolators which iirc are like $20 each. I would just bring your original assembly and new springs/shocks to a shop. |
|
| Author: | NW Reign [ Wed Dec 21, 2011 1:31 am ] |
| Post subject: | Re: Top Plate / Mount differences |
Why do you have to use front isolaters? Are they necessary with the ome bilstein lift for the front? |
|
| Author: | At The Helm [ Wed Dec 21, 2011 1:41 am ] |
| Post subject: | Re: Top Plate / Mount differences |
Yes yes you need the isolators stock, lifted, whatever. They isolate the spring from the top mount and the lower seat to prevent metal to metal contact. |
|
| Author: | j-rod [ Wed Dec 21, 2011 11:45 am ] |
| Post subject: | Re: Top Plate / Mount differences |
i have new lower iso and the top mounts come with new top isos. should be good there |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|