LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Can I install sliders with this damage?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=64132
Page 1 of 1

Author:  Igg [ Tue Dec 13, 2011 1:14 pm ]
Post subject:  Can I install sliders with this damage?

I want to install super skink sliders on my KJ, but the previous owners damaged area under the rear passenger door.

Image

Image

Do you think this damage will effect installing sliders?

Thanks
Igg

Author:  tommudd [ Tue Dec 13, 2011 2:42 pm ]
Post subject:  Re: Can I install sliders with this damage?

No won't hurt a thing when installing the rock rails

Author:  teckman02 [ Tue Dec 13, 2011 3:20 pm ]
Post subject:  Can I install sliders with this damage?

Dang what happened there ouch

Author:  Mr. eXtreme [ Tue Dec 13, 2011 6:20 pm ]
Post subject:  Re: Can I install sliders with this damage?

Bet you wish you had them when this happened. OUCH.

Author:  audiboy86 [ Tue Dec 13, 2011 7:46 pm ]
Post subject:  Re: Can I install sliders with this damage?

You will be fine installing them and they definitely would of helped whenever that happened.

Author:  jamesdart [ Tue Dec 13, 2011 8:11 pm ]
Post subject:  Re: Can I install sliders with this damage?

will work fine, bedline the rocker and you wont even notice that. they might scrape on speed bumps with that low rider though

Author:  tjkj2002 [ Tue Dec 13, 2011 11:45 pm ]
Post subject:  Re: Can I install sliders with this damage?

I've installed sliders on KJ's with worse damage then that to the rockers.

Author:  Igg [ Wed Dec 14, 2011 12:29 am ]
Post subject:  Re: Can I install sliders with this damage?

thanks all, Im def going to get some sliders and skid plates before a lift... don't want this to happen again.

And I have no clue how it happened... It was like this when my family bought it. the fender flares are damaged slightly too (gouged about 1/4" in some spots), but i want to put bed-liner on the plastics to cover it up :)

Author:  ramlebliberty [ Wed Dec 14, 2011 12:14 pm ]
Post subject:  Re: Can I install sliders with this damage?

Skip the sliders, go to you local metal distribution ware house, pick up some rectangular tube & plate and boatside that ish! ;)

Author:  RED_KJ_666 [ Wed Dec 14, 2011 6:56 pm ]
Post subject:  Re: Can I install sliders with this damage?

Image
I like that last Idea it's what I'm doing to mine, It will give you more strength in your uni-body if you tie it in as well as letting you keep that little bit of extra clearance you loose with bolt on sliders.

Author:  Igg [ Wed Dec 14, 2011 11:51 pm ]
Post subject:  Re: Can I install sliders with this damage?

RED_KJ_666 wrote:
Image
I like that last Idea it's what I'm doing to mine, It will give you more strength in your uni-body if you tie it in as well as letting you keep that little bit of extra clearance you loose with bolt on sliders.


Looks nice! but i prefer the skinks tubular style steel...

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/