This is the lower portion which still needs 3 crossmembers welded in. The base frame consists of bed frame angle iron I had,the crossmembers are 1"emt which is tricky to weld to the base seeing how they're different metals,but welds are solid. Sunday I'm cutting (4) 7" pieces for the corners and then just flat steel to square the top in I think. I will be integrating a rear and front light bar as well. Any ideas tell me I also appreciate constructive criticism.Thanks and more pics to come.

_________________
2002 KJ prelowered with 3 1/2" daystar, 3/4" clevis, ome front shocks,Rancho rear shocks, 265/75/16 with 7/15" wheel spacers,homemade roof rack,alpine in-dash DVD touch screen,alpine aftermarket door speakers all around, 2 10" kicker crv's w/Rockford 800.1 amp.

Your second bar looks crooked.

_________________
2006 Jeep Liberty Sport 4x4
Mopar Light Bar
2" Lift

I think its my driveway...lol. just measured,its good.

_________________
2002 KJ prelowered with 3 1/2" daystar, 3/4" clevis, ome front shocks,Rancho rear shocks, 265/75/16 with 7/15" wheel spacers,homemade roof rack,alpine in-dash DVD touch screen,alpine aftermarket door speakers all around, 2 10" kicker crv's w/Rockford 800.1 amp.