Kasmir Jones wrote:
Per Tom, you need CRD shock bolts. Or put a Sleeve in there.
I have the same problem, But I still didnt fix it...
I have the same problem, But I still didnt fix it...
Per Tom, you need CRD shock bolts.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Bilstien shock bushings http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=64885 |
Page 1 of 1 |
| Author: | Cherokeechief [ Thu Jan 26, 2012 3:44 pm ] |
| Post subject: | Bilstien shock bushings |
Hey I was curios if anyone else have had this problem, I put a OME lift with Bilstien shocks on last march, I have been getting some excessive shock noise in the rear end. the top bushing of the shock is bad. I'm wondering if it's possible to just replace the bushings, or do I have to buy new rear shocks just for bad bushings? I've done some reaserch but have not been able to find anything conclusive. Thanks for your advise |
|
| Author: | Kasmir Jones [ Thu Jan 26, 2012 4:11 pm ] |
| Post subject: | Re: Bilstien shock bushings |
Per Tom, you need CRD shock bolts. Or put a Sleeve in there. I have the same problem, But I still didnt fix it... |
|
| Author: | tommudd [ Thu Jan 26, 2012 4:32 pm ] |
| Post subject: | Re: Bilstien shock bushings |
Kasmir Jones wrote: Per Tom, you need CRD shock bolts. Or put a Sleeve in there. I have the same problem, But I still didnt fix it... Per Tom, you need CRD shock bolts.
|
|
| Author: | Kasmir Jones [ Thu Jan 26, 2012 4:53 pm ] |
| Post subject: | Re: Bilstien shock bushings |
tommudd wrote: Kasmir Jones wrote: Per Tom, you need CRD shock bolts. Or put a Sleeve in there. I have the same problem, But I still didnt fix it... Per Tom, you need CRD shock bolts. Well maybe that was someone else...but you did tell me about the sleeve. |
|
| Author: | tommudd [ Thu Jan 26, 2012 5:28 pm ] |
| Post subject: | Re: Bilstien shock bushings |
Kasmir Jones wrote: tommudd wrote: Kasmir Jones wrote: Per Tom, you need CRD shock bolts. Or put a Sleeve in there. I have the same problem, But I still didnt fix it... Per Tom, you need CRD shock bolts. Well maybe that was someone else...but you did tell me about the sleeve.  
|
|
| Author: | Cherokeechief [ Thu Jan 26, 2012 7:54 pm ] |
| Post subject: | Re: Bilstien shock bushings |
Alright cool, I never even thought to put a sleeve in there.  are the CRD bolts that much bigger? I would have thought that it would have the same rear suspention components. shows how much I know about CRD's. guess I have some reading up to do. Thanks guys. I use this forum a lot! although I don't post much because most of the info is already around just gotta find it. |
|
| Author: | BugginKJ [ Thu Jan 26, 2012 11:17 pm ] |
| Post subject: | Re: Bilstien shock bushings |
Here ya go....... viewtopic.php?f=3&t=62063&p=687517&hilit=shock+sleeve#p687517 and what I ended up with, works perfect........ 
|
|
| Author: | tjkj2002 [ Fri Jan 27, 2012 12:10 am ] |
| Post subject: | Re: Bilstien shock bushings |
BugginKJ wrote: Here ya go....... viewtopic.php?f=3&t=62063&p=687517&hilit=shock+sleeve#p687517 and what I ended up with, works perfect........ Hope you didn't keep those boots on them shocks. |
|
| Author: | BugginKJ [ Fri Jan 27, 2012 11:10 am ] |
| Post subject: | Re: Bilstien shock bushings |
Don't worry, I cut the cable ties and inspect them about every other month or so
|
|
| Author: | Cherokeechief [ Fri Jan 27, 2012 2:08 pm ] |
| Post subject: | Re: Bilstien shock bushings |
Perfect! Thanks guys! Now I have a project for the weekend. I can finally get ride of that annoying noise... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|