Same thing happened to mine. I drilled out the factory garbage and used h.d. 1/4" stainless steel rivets to resecure the backing plate. Worked like a charm and still holding very strong.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Parking brake dust shield http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=65107 |
Page 1 of 1 |
| Author: | train754 [ Wed Feb 08, 2012 1:34 pm ] |
| Post subject: | Parking brake dust shield |
My parking brake holder, for the pads, is broken on both sides. The small rivets that hold the cover from moving are all broken. Is there a way to fix this? When driving this dust cover moves causing my parking brakes to rub the inside of the rotor. |
|
| Author: | BugginKJ [ Wed Feb 08, 2012 10:07 pm ] |
| Post subject: | Re: Parking brake dust shield |
Same thing happened to mine. I drilled out the factory garbage and used h.d. 1/4" stainless steel rivets to resecure the backing plate. Worked like a charm and still holding very strong.
|
|
| Author: | EAB [ Thu Feb 23, 2012 10:04 pm ] |
| Post subject: | Re: Parking brake dust shield |
Did you have to pull the axles? Aren't the rivets behind the axle flange? |
|
| Author: | BugginKJ [ Thu Feb 23, 2012 10:26 pm ] |
| Post subject: | Re: Parking brake dust shield |
Nope, theres enough room. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|