| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Jeep Dana 30 Lockrite Locker - Question will it fit? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=65118 |
Page 1 of 1 |
| Author: | Pippobug [ Thu Feb 09, 2012 9:40 am ] |
| Post subject: | Jeep Dana 30 Lockrite Locker - Question will it fit? |
Hi, a quick question, I have found "Jeep Dana 30 Lockrite Locker" for sale on Ebay (it's second hand) and come out of a Grand Cherockee 1998, would that fit in the front differential of my KJ? is so how can I check it's the correct one? tks, Fil. |
|
| Author: | Pippobug [ Thu Feb 09, 2012 6:04 pm ] |
| Post subject: | Re: Jeep Dana 30 Lockrite Locker - Question will it fit? |
Hi A bit more info on the locker it's a powertrax lockrite locker Dana 30 27 spline (splicer model d30 27spl sp 2210). Will it fit in front diff with 4.10 rear? Fil |
|
| Author: | twistedunlimited [ Thu Feb 09, 2012 7:29 pm ] |
| Post subject: | Re: Jeep Dana 30 Lockrite Locker - Question will it fit? |
I am fairly sure it will fit, all the dana 30 carriers are the same except low carriers 3.55 down and high 3.73 up. But this doesn't affect the lockright or spartan lockers... I ordered a spartan for my 05 crd so I hope I know what I'm talking about... Chris |
|
| Author: | tjkj2002 [ Thu Feb 09, 2012 7:45 pm ] |
| Post subject: | Re: Jeep Dana 30 Lockrite Locker - Question will it fit? |
Hope you have a spare diff.Auto lockers and a D30A should never be combined.The whole diff will have to removed and the carrier will have to be removed to even install a lunchbox locker.The center pin in the D30A is held in by a roll pin and not the tradional bolt. |
|
| Author: | Pippobug [ Fri Feb 10, 2012 3:50 am ] |
| Post subject: | Re: Jeep Dana 30 Lockrite Locker - Question will it fit? |
tjkj2002 wrote: Hope you have a spare diff.Auto lockers and a D30A should never be combined.The whole diff will have to removed and the carrier will have to be removed to even install a lunchbox locker.The center pin in the D30A is held in by a roll pin and not the tradional bolt. Tjkj2002, I guess what you are saying is to pass and not realy bother, more trouble that it's worth. Also it's a second hand one and there are some parts missing. Tks, Fil. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|