| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Replacing LCA bushings and balljoints http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=65179 |
Page 1 of 1 |
| Author: | SBrooks [ Tue Feb 14, 2012 11:09 am ] |
| Post subject: | Replacing LCA bushings and balljoints |
I'll soon be replacing the bushings (arm-to-body and strut fork) and balljoints in the LCAs on my '06 4x4. I'll be replacing the entire UCAs with ones from JBA. After doing a forum search, I've found plenty of info about the LCA bushings/balljoints in general, but not much about how to actually remove/replace them into the arm. I'd greatly appreciate any recommendations that can be given as to how to do this and what tools/etc to use. Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|