| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| cv confusion http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=65310 |
Page 1 of 1 |
| Author: | Diver [ Mon Feb 20, 2012 6:08 pm ] |
| Post subject: | cv confusion |
After hearing some noise from my front end, I found the passenger inner CV boot torn. all the grease was everywhere except the joint. I figure the joint is shot booty well as the boot. Discount parts has the GSP North America CV Half Shaft, PN NCV82015 for $55. NAPA has a cv for $175. Is the GSP all I need? is it a complete unit? Diver |
|
| Author: | tommudd [ Mon Feb 20, 2012 6:26 pm ] |
| Post subject: | Re: cv confusion |
Go to NAPA for a remanned one best way to go as they have the right size The cost is oly like 55 -60 bucks when you turn in the old one ( core ) |
|
| Author: | audiboy86 [ Mon Feb 20, 2012 8:04 pm ] |
| Post subject: | Re: cv confusion |
Listen to TOM go with the napa or a mopar version you do not want to fight with a CV that doesn't fit. So buy the NAPA turn the old one in and be happy with paying $63 and some change for the right CV. Nad i can't remember which side of the Gasser version has the inner shaft coming off the CV. But if it is the passenger side get the half shaft from Erics Auto Parts there is a link somewhere on here. |
|
| Author: | tommudd [ Mon Feb 20, 2012 10:12 pm ] |
| Post subject: | Re: cv confusion |
Eric is gone from that place and last time I heard they didn't have any Yes while doing it replace the Intermediate shaft as well since they wear out and the splines actually wear away. Installing a new CV with a worn intermediate will cause more issues |
|
| Author: | Diver [ Wed Feb 22, 2012 12:55 am ] |
| Post subject: | Re: cv confusion |
Anybody have a PN for the NAPA part you're using? I tried the website, but all i got was a $175 CV kit that was all in parts... Diver |
|
| Author: | tommudd [ Wed Feb 22, 2012 1:01 am ] |
| Post subject: | Re: cv confusion |
CV Driveshaft - Right Front - Remfd Part Number: NMD 958484 Product Line: NAPA MaxDrive Part Number: NMD 958484 Product Line: NAPA MaxDrive Attributes: Contents : Axle Nut Included CV Driveshaft Compressed Length : 23 5/8" Inboard Joint Type : Female Includes ABS Inner Sensor Ring : No Inner Joint Spline Count : 29 Longevity Enhancements : 3% Moly Grease New Components : Neoprene Boots Outboard Joint Type : Male Outer Joint Spline Count : 27 -OR- CV Driveshaft - Right Front - Remfd Part Number: NMD 958355 Product Line: NAPA MaxDrive Part Number: NMD 958355 Product Line: NAPA MaxDrive Attributes: Contents : Axle Nut Included CV Driveshaft Compressed Length : 22 3/4" Inboard Joint Type : Female Includes ABS Inner Sensor Ring : No Inner Joint Spline Count : 29 Longevity Enhancements : 3% Moly Grease New Components : Neoprene Boots Outboard Joint Type : Male Outer Joint Spline Count : 27 one or the other too tired to walk out to the garage and look tonight I'll look up the Intermediate shaft number for you also make it real easy
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|