It is quite easy.
Here is Tony's installation process.
viewtopic.php?f=45&t=57725
Enjoy the light!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Light-bar Template http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=65448 |
Page 1 of 1 |
| Author: | SwampFox [ Thu Feb 23, 2012 5:37 pm ] |
| Post subject: | Light-bar Template |
Hey ladies and gents, I was lucky enough to get the chance to cannibalize a wrecked Renny the other day and managed to lift the light-bar for $150 (wires, switches, everything). Now, I intend on having the stealer-ship install it, but evidently DC, in all of her wisdom, does not have the template for the light-bar in the system. Any ideas on where to get one or if anybody has one laying around? Appreciate the help y'all. |
|
| Author: | tjkj2002 [ Thu Feb 23, 2012 5:40 pm ] |
| Post subject: | Re: Light-bar Template |
No template needed,the base acts just like one.Place on roof,make sure it's centered and center punch all holes and drill. |
|
| Author: | SwampFox [ Thu Feb 23, 2012 7:30 pm ] |
| Post subject: | Re: Light-bar Template |
Appreciate it TJKJ, the stealership said they wanted one, but, I guess it's time for them to man up and get it done. |
|
| Author: | infernicus [ Thu Feb 23, 2012 7:41 pm ] |
| Post subject: | Re: Light-bar Template |
It is quite easy. Here is Tony's installation process. viewtopic.php?f=45&t=57725 Enjoy the light!
|
|
| Author: | tjkj2002 [ Thu Feb 23, 2012 8:25 pm ] |
| Post subject: | Re: Light-bar Template |
SwampFox wrote: Appreciate it TJKJ, the stealership said they wanted one, but, I guess it's time for them to man up and get it done. I installed mine in a parking lot in under 2 hours.You can find the PDF instructions easily enough.Not hard to by anymeans. |
|
| Author: | SwampFox [ Fri Feb 24, 2012 6:18 pm ] |
| Post subject: | Re: Light-bar Template |
Appreciate the help sirs, might just do it myself, the one install write up was fantastic. Save the money I'd give I.G.B. to install it and buy more parts. 
|
|
| Author: | gtommec [ Sat Feb 25, 2012 5:09 am ] |
| Post subject: | Re: Light-bar Template |
SwampFox wrote: Appreciate the help sirs, might just do it myself, the one install write up was fantastic. Save the money I'd give I.G.B. to install it and buy more parts. I have done three myself and they are easy-peasy, although on the the last two i did away with the nutzerts and bolts and just pop rivited them to the roofs, much easier and less rust. |
|
| Author: | SB06KJ [ Sat Feb 25, 2012 3:50 pm ] |
| Post subject: | Re: Light-bar Template |
Can you still get parts from the renny? |
|
| Author: | SwampFox [ Sun Feb 26, 2012 4:43 pm ] |
| Post subject: | Re: Light-bar Template |
SB06KJ, yes I can, is there anything you need in particular? And thanks Tomme, pop rivets are a good idea, I got more pop rivets than I know what to do with. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|