Hi,
can anyone help me with the correct part number for the Bushes for the rear suspention A Frame? I need to replace them

Looking for the 2 bushes that hold the Rear A frame and the part number for the main central bush that connects to the rear axel.

My KJ is a 2003 ( actual built 10/2002).

Thank you,

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

For the Tri-link try
# 52088425 for the front two
Ball Joint in the rear is 52088647AB

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Tom,

Thank you for the information.

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Hi,

A bit of help. I got the parts and fittend them, but now I have a popping noise from the back.

I think it might be the center bush connected to the back differential that keeps popping out as it's a bit too streched.

I am lifed and sitting at 22 inc at the back, set up is OME948 & OME132L + 2 top isolator each side.

What do I need to do to make it stop?

I have seen Jeeping by Al sells a drop link for the back axel for 4 inc lift, see http://jeepinbyal.com/prod-Link_Extension-463.aspx, would this solve the problem?

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Are you sure you have them in good and solid?
I'm at least an inch higher than you are and no popping or anything

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Tom,

Yes, I have checked, but might go and check again and make double sure.

I take it you have the standard A frame at the back, that UCA from JBA would help so not to have the boll joint at such an angle?

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Fil - if you are thinking about that link extension, I'd read this before buying it http://www.ausjeepoffroad.com/forum/sho ... p?t=112902

If you are looking at the complete replacement from JbA then firstly, it involves welding onto the top of the rear diff, and secondly, some of the joints used MAY not be legal under the construction and use regulations over here.

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

Lancer,
Thank you for your post. Looks like the popping noise has stopped so I won't be looking to add the JBA lift ball joint. Maybe if i decide to add more lift, then i will reconsider maybe.
Fil

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators