If I remember correctly, I think sticking with Dana/Spicer or OEM will net you the best results.
Precision Gears sells relabeled Dana/Spicer parts.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| motive gears http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=65590 |
Page 1 of 1 |
| Author: | JMSMN [ Fri Mar 02, 2012 2:34 pm ] |
| Post subject: | motive gears |
How is the quality of motive gears? |
|
| Author: | infernicus [ Fri Mar 02, 2012 3:11 pm ] |
| Post subject: | Re: motive gears |
If I remember correctly, I think sticking with Dana/Spicer or OEM will net you the best results. Precision Gears sells relabeled Dana/Spicer parts.
|
|
| Author: | 2006 KJ [ Sat Mar 03, 2012 4:38 pm ] |
| Post subject: | Re: motive gears |
JMSMN wrote: How is the quality of motive gears? they are good |
|
| Author: | audiboy86 [ Sat Mar 03, 2012 7:41 pm ] |
| Post subject: | Re: motive gears |
I ran Dana and Yukon never seen or heard anything about motive. So you can take that as good or bad. But research on some other 4x4 sites and some race sites. Since both types of vehicles pound there gears about the same way. |
|
| Author: | tjkj2002 [ Sat Mar 03, 2012 9:47 pm ] |
| Post subject: | Re: motive gears |
I've run Motive 5.14's in my RJ60 for over 14,000 miles with zero issues and zero noise,granted there one of the few that make thick 5.14's for a HP60 though so I didn't have much of a choice. |
|
| Author: | tommudd [ Sun Mar 04, 2012 3:39 pm ] |
| Post subject: | Re: motive gears |
I have Motive in the rear of mine, been there over 20,000 miles and no issues , no whine, no gear noise at all with Dino gear lube in it 
|
|
| Author: | JMSMN [ Sun Mar 04, 2012 4:30 pm ] |
| Post subject: | Re: motive gears |
Thanks guys for the replies. Going to order this week or next. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|